Bidford-on-Avon, Warwickshire. Mon to Fri.01789 224228

Industries · Theme parks, museums and attractions

Silicone and rubber moulds for theme parks, museums and attractions.

Large rubber moulds for themed rockwork, carved panels and queue-line features, museum-grade replicas of artefacts, fossils and specimens, and repeat exhibition pieces. For theme park operators, theming contractors, museums, heritage sites and exhibition designers.

CustomProject-led tooling
MaterialsSelected for the application
ScopeAgreed against your brief
ContactWarwickshire, UK

What attractions need

Big pieces, fine detail and replacements that match years later.

A dinosaur skeleton on display in a museum.
A dinosaur skeleton on display in a museum. Representative photograph. Photo: Narciso Arellano

Theming has to survive weather, crowds and cleaning, and still look hand-carved. Museum replicas have to be faithful enough to stand beside the original.

We make large, supported silicone and polyurethane moulds that release textured rockwork, timber-effect panels and sculpted features in GRP, GRC and resin, panel after panel. For collections, we take moulds from objects using conservation-appropriate methods agreed with your conservator, or from 3D scans where contact is not allowed.

Material documentation, inspection requirements, manufacturing responsibilities and any necessary approvals should be specified and confirmed for your project before work is authorised.

Our moulding processes

Typical attractions work

What we make for attractions and collections.

Six families of tooling cover most enquiries in this industry.

Theming

Rockwork and textured panels

Large rubber moulds for rock faces, cave walls, timber effects and weathered stone in GRP and GRC.

Features

Sculpted characters and features

Multi-part moulds for statues, figures and centrepieces cast in resin or fibreglass.

Replicas

Artefact, fossil and specimen replicas

Moulds from objects or 3D scans for handling collections, touring exhibitions and shop reproductions.

Exhibitions

Repeat exhibition pieces

Tooling for display mounts, interpretive panels, tactile models and touch objects made in quantity.

Water

Water play and splash features

Moulds for textured surfaces and features that sit in or near water, cast in suitable resins and concretes.

Retail

Licensed merchandise and souvenirs

Production moulds for premium souvenirs and collectables based on the attraction or the collection.

Parts and tooling

Choosing the mould for the piece.

A general guide. Geometry, material and volume decide the final tool.

Typical guide values, confirmed on your quotation. We confirm grade, tool life and lead time against your part and process.

PieceTypical mouldTypical castingWhy it matters
Rockwork and texture panelsLarge supported silicone or PUGRP, GRC, sprayed concreteRepeat texture across a whole site
Sculpted featuresMulti-part silicone with jacketResin, fibreglassUndercuts release without damage
Artefact replicasConservation-approved silicone, or scan-basedResin, plaster, JesmoniteFaithful detail, original protected
Tactile and handling objectsSilicone or polyurethaneTough resinsSurvive daily handling
Souvenirs and collectablesMulti-cavity siliconeResin, plaster, wax, chocolateVolume at consistent quality

Send the drawing, the material and the quantities with your enquiry so we can confirm the route before quoting.

Examples

What silicone and rubber can do in theme parks, museums and attractions.

Eight typical jobs for silicone, polyurethane and rubber tooling in this industry. Each one can be a single development tool or a full production set.

Replica detail: master, mould and release. Labelled conceptual diagram, not a project photograph.
Concept diagram: Replica detail: master, mould and release. Illustrative geometry, not a photograph or production drawing.
Open labelled diagram
01

Themed rockwork

Large moulds for rock faces and cave walls in GRP and GRC.

Supported silicone, PU
02

Sculpted characters

Multi-part moulds for statues and centrepieces.

Silicone, jacketed
03

Fossil and skeleton replicas

Museum-grade casts of fossils and specimens.

Silicone
04

Artefact replicas

Handling and touring replicas from objects or scans.

Silicone
05

Tactile models

Touch objects and tactile maps for accessible displays.

Silicone, PU
06

Queue-line theming

Repeat panels for timber, stone and weathered effects.

Supported PU
07

Water features

Textured surfaces and features for water areas.

Silicone, PU
08

Premium souvenirs

Production moulds for collectables and gift-shop ranges.

Silicone

Tooling ideas, clearly explained

How we show the tool is right before it reaches your line.

Larger customers ask the same questions: how is it checked, what is it made from, and can you make another one exactly the same? This is how we answer them.

Hands using a digital calliper to check a component.
Measured against your drawingFirst parts from every tool are measured against the drawing before production volumes are released.Hands using a digital calliper to check a component. Representative application photograph.
A circular rubber ring on a plain background.
Traceable materialsA material declaration is supplied with every order, and material data sheets are available on request. Food-contact moulds and their paperwork are supplied through our sister division TCI Culinary. A circular rubber ring on a plain background. Representative stock photograph. Photo: Tam DV
Machined metal components resting on an engineering drawing.
Masters archivedWe keep your masters and drawings on file so repeats are straightforward. Machined metal components resting on an engineering drawing. Representative stock photograph. Photo: EnCata PD
A packed carton ready for dispatch
. Photo: Brandable Box on Unsplash.Shipped with paperworkTools leave with the material declaration for your order, packed for the journey to your line.

Photos: Brandable Box, Jessica Streser, Wilhelm Gunkel, laura adai on Unsplash.

  • Fixed written quotesTooling price, cost per part and payment stages agreed up front. We'll confirm lead times on your quotation.
  • Please contact us before sending sensitive drawings or samples so that any confidentiality arrangements can be agreed.
  • Discuss the technical brief, review stages and project contacts with us when scoping your tooling.
  • Designed in WarwickshireA Warwickshire mould shop, part of TCI Group.
  • Staged approvalsFeasibility, development, validation and production, each on its own PO.
  • Any tooling-specific terms, expected service conditions and remedies must be confirmed in your written quotation and order agreement.

How we work

What comes with every programme.

Discuss confidentiality

Please contact us before sending sensitive drawings or samples so that any confidentiality arrangements can be agreed.

Project communication

You have a named contact for your programme, from feasibility to repeat supply, and is the person your engineering, quality and procurement teams speak to.

Documentation procurement recognises

Material documentation, inspection requirements, manufacturing responsibilities and any necessary approvals should be specified and confirmed for your project before work is authorised.

Project terms

Any tooling-specific terms, expected service conditions and remedies must be confirmed in your written quotation and order agreement.

A whale skeleton suspended in a museum hall
A whale skeleton suspended in a museum hall. Representative photograph. Photo: Korng Sok

Programme stages

From brief to production tooling.

  1. Brief and review

    We review the part, the material, the quantities and the deadline, and propose the tooling.

  2. Discuss confidentiality

    Please contact us before sending sensitive drawings or samples so that any confidentiality arrangements can be agreed.

  3. Master and first tool

    Master made from your CAD, scan or original, and the first tool trialled.

  4. Refinement

    Fit, finish and release tuned from the trial before tools are duplicated.

  5. Production sets and spares

    Matched sets, planned replacements and archived masters.

Common questions

What buyers in this industry usually ask.

Can you mould directly from a museum object?

Sometimes. It depends on the object, its surface and your conservator. Where contact moulding is not appropriate, we work from high-resolution 3D scans and print or machine a master, so the original is never touched.

How large can a single mould be?

We build large panels and features as supported moulds with rigid jackets, split so they can be handled and demoulded safely. Tell us the overall size and we will propose how to break it down.

Do you install theming?

No. We make the moulds and masters, and supply castings through partners where needed. We work alongside your theming contractor or installer.

What does a typical programme cost?

Pricing depends on your design, materials, quantities and tooling scope. Ask us for a quotation against your project brief.

Related industries

Other industries we tool for.

Foundry workers pouring molten metal into casting moulds
Fine art

Fine art, sculpture and foundries

Silicone moulds and jackets for sculptors, galleries and art foundries: bronze edition moulds, wax pattern tooling, resin and Jesmonite editions.

Read more
Molten metal being poured in a jewellery casting workshop
Luxury

Jewellery, watches and luxury goods

Vulcanised rubber and silicone moulds for jewellery houses, watch brands and luxury goods makers: wax injection tooling, straps, hardware and packaging inserts.

Read more
A cast stone basin and vanity in a high-end bathroom
Interiors

Luxury interiors, furniture and bathrooms

Moulds for bespoke concrete, Jesmonite, terrazzo and composite basins, baths, worktops, wall panels, furniture and lighting for high-end interiors.

Read more

All industries

Start a programme

Send the concept art, the scan or the object list.

We will propose the mould strategy, the casting materials and a fixed programme price.

Your project, our expertise

Talk through your next mould.

Contact TCI Mouldings with your drawings, samples and production requirements so the technical brief and next steps can be discussed.

  • A real Warwickshire workshopUnit 15, Waterloo Park, Bidford-on-Avon, Alcester B50 4JG.
  • Real people on the phoneCall the team on 01789 224228, Monday to Friday.
  • Agree your project contactsDesign, production and aftercare come from the people you see here.
  • Part of TCI GroupFour specialist divisions under TCI Group, one engineering team. Visit TCI Group.
Two engineers reviewing a three-dimensional model on a computer.
Two engineers reviewing a three-dimensional model on a computer. Representative stock photograph. Photo: Kumpan Electric
Hands measuring a circular component with a digital calliper.
Hands measuring a circular component with a digital calliper. Representative stock photograph. Photo: AFINIS Group ® - AFINIS GASKET® Production
Hands measuring a flexible black sealing ring with digital callipers beside manufacturing equipment.
Representative stock photograph: flexible sealing-component inspection, not TCI premises or a TCI project. Stock photo credit
  • Thomas LaneManaging Director
  • George PrestonDesign & Project Manager
  • Kelly BallingerHead of Partnerships
  • Jim AndertonProduction Manager
  • TheodoreEmployee Welfare
Meet the team