Bidford-on-Avon, Warwickshire. Mon to Fri.01789 224228

Industries · Public realm, landscape and monuments

Moulds for large concrete street furniture, water features and monuments.

Supported polyurethane and silicone moulds for big benches, planters, bollards, fountains, paving, memorials and public sculpture cast in concrete, GRC, terrazzo and cast stone. For street furniture manufacturers, landscape contractors, councils’ suppliers and public art studios.

CustomProject-led tooling
MaterialsSelected for the application
ScopeAgreed against your brief
ContactWarwickshire, UK

What public realm schemes need

Big, heavy pieces that still look designed.

Cast concrete benches along a promenade
Cast concrete benches along a promenade. Representative photograph. Photo: Nguyễn Hiệp

A scheme might need sixty identical benches, a run of planters that line up, a water feature that holds water, and a memorial that has to be right first time. The concrete is the easy part. The mould decides how it looks.

We build large supported moulds with a detailed rubber face and a rigid case, designed for forklift or crane demoulding, and with lifting inserts, drainage and fixing positions designed in. Smooth sculpted forms, crisp chamfers, lettering and textured faces all come from the same master.

Material documentation, inspection requirements, manufacturing responsibilities and any necessary approvals should be specified and confirmed for your project before work is authorised.

Our moulding processes

Typical public realm work

What we make for landscape and public realm.

Six families of tooling cover most enquiries in this industry.

Seating

Benches and seating walls

Large supported moulds for sculpted benches, seating walls and terraces, with recesses for timber slats and fixings.

Planters

Planters, tree pits and troughs

Moulds for large planters and tree surrounds with drainage, lifting points and a finish that matches across the scheme.

Water

Fountains, rills and water features

Moulds for basins, rills and cascade blocks with smooth or textured faces and the falls built into the master.

Paving

Feature paving and tactile slabs

Rubber moulds for textured, patterned and lettered paving, wayfinding inlays and tactile units.

Memorials

Memorials, monuments and lettering

Moulds for monuments, plaques and lettered stones with crisp carved detail in cast stone or concrete.

Art

Public sculpture and play features

Sectional moulds for large public sculpture and play features in GRC, concrete or resin.

Parts and tooling

Matching the mould to the piece.

A general guide. Geometry, material and volume decide the final tool.

Typical guide values, confirmed on your quotation. We confirm grade, tool life and lead time against your part and process.

PieceTypical mouldTypical castingWhy it matters
Sculpted benchSupported PU with rigid caseConcrete, UHPC, GRCSmooth curves, repeatable across a scheme
Large planterSplit supported mouldConcrete, GRCDrainage and lifting designed in
Water featureSilicone or PU faceConcrete, terrazzoFalls and edges that hold water
Feature pavingMulti-cavity rubber mouldConcrete, cast stoneTexture and lettering in every unit
Memorial or monumentSilicone face with jacketCast stone, concreteCrisp lettering, right first time

Send the drawing, the material and the quantities with your enquiry so we can confirm the route before quoting.

Examples

What silicone and rubber can do in public realm, landscape and monuments.

Eight typical jobs for silicone, polyurethane and rubber tooling in this industry. Each one can be a single development tool or a full production set.

Landscape castings: surface, liner and support. Labelled conceptual diagram, not a project photograph.
Concept diagram: Landscape castings: surface, liner and support. Illustrative geometry, not a photograph or production drawing.
Open labelled diagram
01

Sculpted benches

Large supported moulds for curved benches and seating walls, demoulded by crane.

Supported PU
02

Planters and tree pits

Split moulds with drainage, lifting points and matched finishes.

Supported PU
03

Fountains and rills

Basins, rills and cascade blocks with falls designed into the master.

Silicone, PU
04

Feature and tactile paving

Multi-cavity moulds for textured, lettered and tactile units.

Polyurethane
05

Bollards and markers

Moulds for bollards, wayfinding markers and boundary posts.

Supported PU
06

Memorials and plaques

Crisp lettering and carved detail in cast stone and concrete.

Silicone
07

Public sculpture

Sectional moulds for large sculptures in GRC, concrete or resin.

Silicone, jacketed
08

Play features

Moulds for climbing boulders, play sculptures and splash-pad features.

Supported PU

Tooling ideas, clearly explained

How we show the tool is right before it reaches your line.

Larger customers ask the same questions: how is it checked, what is it made from, and can you make another one exactly the same? This is how we answer them.

Hands using a digital calliper to check a component.
Measured against your drawingFirst parts from every tool are measured against the drawing before production volumes are released.Hands using a digital calliper to check a component. Representative application photograph.
A circular rubber ring on a plain background.
Traceable materialsA material declaration is supplied with every order, and material data sheets are available on request. Food-contact moulds and their paperwork are supplied through our sister division TCI Culinary. A circular rubber ring on a plain background. Representative stock photograph. Photo: Tam DV
Machined metal components resting on an engineering drawing.
Masters archivedWe keep your masters and drawings on file so repeats are straightforward. Machined metal components resting on an engineering drawing. Representative stock photograph. Photo: EnCata PD
A packed carton ready for dispatch
. Photo: Brandable Box on Unsplash.Shipped with paperworkTools leave with the material declaration for your order, packed for the journey to your line.

Photos: Brandable Box, Jessica Streser, Wilhelm Gunkel, laura adai on Unsplash.

  • Fixed written quotesTooling price, cost per part and payment stages agreed up front. We'll confirm lead times on your quotation.
  • Please contact us before sending sensitive drawings or samples so that any confidentiality arrangements can be agreed.
  • Discuss the technical brief, review stages and project contacts with us when scoping your tooling.
  • Designed in WarwickshireA Warwickshire mould shop, part of TCI Group.
  • Staged approvalsFeasibility, development, validation and production, each on its own PO.
  • Any tooling-specific terms, expected service conditions and remedies must be confirmed in your written quotation and order agreement.

How we work

What comes with every programme.

Discuss confidentiality

Please contact us before sending sensitive drawings or samples so that any confidentiality arrangements can be agreed.

Project communication

You have a named contact for your programme, from feasibility to repeat supply, and is the person your engineering, quality and procurement teams speak to.

Documentation procurement recognises

Material documentation, inspection requirements, manufacturing responsibilities and any necessary approvals should be specified and confirmed for your project before work is authorised.

Project terms

Any tooling-specific terms, expected service conditions and remedies must be confirmed in your written quotation and order agreement.

A curved cast concrete wall with crisp form-tie detail
A curved cast concrete wall with crisp form-tie detail. Representative photograph. Photo: Clarisse Croset

Programme stages

From brief to production tooling.

  1. Brief and review

    We review the part, the material, the quantities and the deadline, and propose the tooling.

  2. Discuss confidentiality

    Please contact us before sending sensitive drawings or samples so that any confidentiality arrangements can be agreed.

  3. Master and first tool

    Master made from your CAD, scan or original, and the first tool trialled.

  4. Refinement

    Fit, finish and release tuned from the trial before tools are duplicated.

  5. Production sets and spares

    Matched sets, planned replacements and archived masters.

Common questions

What buyers in this industry usually ask.

How big a piece can you mould?

We design large moulds as supported, split tools that can be handled and demoulded with your lifting equipment. Tell us the overall size, weight and how you demould, and we will propose how the mould should break down.

Can you include lettering and logos?

Yes. Lettering, crests, logos and wayfinding can be built into the master, so they are cast into every piece rather than added afterwards.

Do you cast the finished pieces?

Our focus is the moulds and masters. We work with your yard or casting partner, and can introduce casting partners where needed.

What does a typical programme cost?

Pricing depends on your design, materials, quantities and tooling scope. Ask us for a quotation against your project brief.

Related industries

Other industries we tool for.

Jet engines on build stands in an aerospace hangar
Aerospace

Aerospace and defence

Silicone and polyurethane tooling, masking and holding fixtures, and vacuum-cast validation parts, built to drawing with documented inspection.

Read more
Medical-grade silicone tubing
Medical

Medical and medical devices

Development and bridge tooling, skin-contact silicone parts, anatomical models and LSR routes for device manufacturers and their design partners.

Read more
A technician at work in a composites production hall
Composites

Carbon fibre and composites

Silicone bladders and intensifiers, caul plates, master plugs and layup tooling for motorsport, automotive, marine, UAV and sporting goods.

Read more

All industries

Start a programme

Send the landscape drawings and the furniture schedule.

We will propose the moulds, the expected uses and a fixed programme price.

Your project, our expertise

Talk through your next mould.

Contact TCI Mouldings with your drawings, samples and production requirements so the technical brief and next steps can be discussed.

  • A real Warwickshire workshopUnit 15, Waterloo Park, Bidford-on-Avon, Alcester B50 4JG.
  • Real people on the phoneCall the team on 01789 224228, Monday to Friday.
  • Agree your project contactsDesign, production and aftercare come from the people you see here.
  • Part of TCI GroupFour specialist divisions under TCI Group, one engineering team. Visit TCI Group.
Two engineers reviewing a three-dimensional model on a computer.
Two engineers reviewing a three-dimensional model on a computer. Representative stock photograph. Photo: Kumpan Electric
Hands measuring a circular component with a digital calliper.
Hands measuring a circular component with a digital calliper. Representative stock photograph. Photo: AFINIS Group ® - AFINIS GASKET® Production
Hands measuring a flexible black sealing ring with digital callipers beside manufacturing equipment.
Representative stock photograph: flexible sealing-component inspection, not TCI premises or a TCI project. Stock photo credit
  • Thomas LaneManaging Director
  • George PrestonDesign & Project Manager
  • Kelly BallingerHead of Partnerships
  • Jim AndertonProduction Manager
  • TheodoreEmployee Welfare
Meet the team