Bidford-on-Avon, Warwickshire. Mon to Fri.01789 224228

Industries · Medical and medical devices

Tooling and silicone parts for medical device manufacturers.

Development and bridge tooling, skin-contact silicone parts, anatomical models and LSR injection routes for device manufacturers, neurotech and wearable companies, and the design consultancies that work with them.

CustomProject-led tooling
MaterialsSelected for the application
ScopeAgreed against your brief
ContactWarwickshire, UK

What device teams need

Parts your QMS can qualify, from a partner who says what they are not.

Cast dental models produced from precision impressions
Cast dental models produced from precision impressions. Representative photograph. Photo: Elena Mozhvilo

Device programmes move from concept to verification to production, and the tooling has to keep up without forcing a production commitment too early.

Material documentation, inspection requirements, manufacturing responsibilities and any necessary approvals should be specified and confirmed for your project before work is authorised.

We are clear about our role. We are a tooling and development partner, not the legal manufacturer of your device. That clarity is what lets your regulatory and quality teams plan around us with confidence.

Compression-tooling concept for ear pads

Typical medical work

What we make for device manufacturers.

The medical work we quote usually falls into six families.

Wearables

Skin-contact pads and interfaces

Soft silicone pads, cushions and interfaces for wearable, neurotech and monitoring devices, moulded to hold geometry and feel the same part to part.

Seals

Seals, gaskets and membranes

Compression-moulded and cast seals, valves and membranes in tested grades, for device housings and fluid paths.

Development

Usability and verification parts

Vacuum-cast housings and silicone components for usability studies, design verification and clinician feedback before production tooling.

Models

Anatomical and training models

Layered-hardness silicone models for surgical training, device demonstration and simulation, from scan data or supplied masters.

Bridge tooling

Pilot and bridge production tools

Compression and soft tooling that carries a pilot build while the production tool is validated.

Production

LSR injection routes

Liquid silicone rubber injection tooling for production volumes, with parts moulded on our own LSR presses and first parts measured against the drawing.

Routes by stage

Matching the tooling route to the device stage.

A general guide. Device class, material and volume decide the final route.

Typical figures for planning. We confirm material data, tolerances and lead times against your specification.

Typical guide values, confirmed on your quotation.
StageTypical routeTypical quantityWhat you receive
Concept and usabilitySilicone tooling, vacuum casting5 to 50 partsParts, material data sheets
Design verificationVacuum casting, compression tools20 to 300 partsParts, material declaration, batch traceability on request
Pilot and bridgeCompression or bridge toolingHundreds to low thousandsParts, material declaration, first parts measured against the drawing
ProductionLSR injection toolingThousands upwardsTooling, material declaration with every order

Material approvals stay with your QMS. We supply the evidence and lock the grade, supplier and process settings once you approve them.

Examples

What silicone and rubber can do in medical and medical devices.

Eight typical jobs for silicone, polyurethane and rubber tooling in this industry. Each one can be a single development tool or a full production set.

Component development: geometry and inspection. Labelled conceptual diagram, not a project photograph.
Concept diagram: Component development: geometry and inspection. Illustrative geometry, not a photograph or production drawing.
Open labelled diagram
01

Mask cushions and seals

Soft silicone cushions and face seals for respiratory and anaesthesia devices, from development to bridge supply.

Platinum silicone
02

Wearable housings

Skin-contact silicone housings and straps for monitors, sensors and patches.

Platinum silicone
03

Valves and diaphragms

Thin, precise silicone valves and diaphragms for pumps and fluid paths, moulded for trial builds.

Silicone, LSR route
04

Anatomical models

Realistic organs, vessels and tissue for device testing, sales demonstrations and surgeon training.

Silicone, PU
05

Grips and handles

Soft-touch overmoulded grips for surgical and diagnostic instruments.

Silicone, TPE route
06

Tube sets and manifolds

Moulded silicone manifolds, connectors and tube junctions for fluid-handling devices.

Platinum silicone
07

Device enclosures

Vacuum-cast enclosures and covers for user trials, verification builds and pre-launch batches.

Silicone tool, PU parts
08

Seals and gaskets

Equipment seals and gaskets for analysers, imaging and laboratory instruments.

Silicone, EPDM

Tooling ideas, clearly explained

How we show the tool is right before it reaches your line.

Larger customers ask the same questions: how is it checked, what is it made from, and can you make another one exactly the same? This is how we answer them.

Hands using a digital calliper to check a component.
Measured against your drawingFirst parts from every tool are measured against the drawing before production volumes are released.Hands using a digital calliper to check a component. Representative application photograph.
A circular rubber ring on a plain background.
Traceable materialsA material declaration is supplied with every order, and material data sheets are available on request. Food-contact moulds and their paperwork are supplied through our sister division TCI Culinary. A circular rubber ring on a plain background. Representative stock photograph. Photo: Tam DV
Machined metal components resting on an engineering drawing.
Masters archivedWe keep your masters and drawings on file so repeats are straightforward. Machined metal components resting on an engineering drawing. Representative stock photograph. Photo: EnCata PD
A packed carton ready for dispatch
. Photo: Brandable Box on Unsplash.Shipped with paperworkTools leave with the material declaration for your order, packed for the journey to your line.

Photos: Brandable Box, Jessica Streser, Wilhelm Gunkel, laura adai on Unsplash.

  • Fixed written quotesTooling price, cost per part and payment stages agreed up front. We'll confirm lead times on your quotation.
  • Please contact us before sending sensitive drawings or samples so that any confidentiality arrangements can be agreed.
  • Discuss the technical brief, review stages and project contacts with us when scoping your tooling.
  • Designed in WarwickshireA Warwickshire mould shop, part of TCI Group.
  • Staged approvalsFeasibility, development, validation and production, each on its own PO.
  • Any tooling-specific terms, expected service conditions and remedies must be confirmed in your written quotation and order agreement.

How we work with device teams

What comes with every medical programme.

Discuss confidentiality

Please contact us before sending sensitive drawings or samples so that any confidentiality arrangements can be agreed.

Project communication

You have a named contact for your programme, from feasibility to repeat supply, and is the person your engineering, quality and procurement teams speak to.

Documentation procurement recognises

Material documentation, inspection requirements, manufacturing responsibilities and any necessary approvals should be specified and confirmed for your project before work is authorised.

Project terms

Any tooling-specific terms, expected service conditions and remedies must be confirmed in your written quotation and order agreement.

Laboratory samples being prepared in a tray
Laboratory samples being prepared in a tray. Representative photograph. Photo: Louis Reed

Programme stages

From concept parts to production tooling.

  1. Brief and material review

    We review the CAD, device class, contact type and the data your submission needs, and shortlist grades.

  2. Discuss confidentiality

    Please contact us before sending sensitive drawings or samples so that any confidentiality arrangements can be agreed.

  3. Development parts

    Silicone or vacuum-cast parts for usability and verification, with batch traceability available on request.

  4. Bridge and pilot

    Bridge tooling for pilot builds while production tooling is validated.

  5. Production supply

    LSR or compression production tooling, locked process settings and repeat supply.

Questions from device teams

What engineering, quality and regulatory teams usually ask.

Are you ISO 13485 certified?

No. We do not hold ISO 13485 certification. Tell us which documents your project requires, and we will confirm on your quotation what we can supply. This website does not establish certification or finished-product suitability.

Which silicones do you use for skin-contact and medical parts?

Confirm the material data, certification and validation requirements for your application before ordering. This page does not establish certification or finished-product suitability.

Can you make parts for usability studies and clinical evaluations?

Yes. Vacuum-cast and silicone-moulded parts are a common route for usability studies, design verification and investor or clinician demonstrations, before the production tool is committed.

Can you make anatomical or training models?

Yes. We make silicone and polyurethane models with layered hardness for surgical training, device demonstration and simulation, from scan data or a master you supply.

What does a typical medical programme cost?

Pricing depends on your design, materials, quantities and tooling scope. Ask us for a quotation against your project brief.

Related industries

Other industries we tool for.

A technician at work in a composites production hall
Composites

Carbon fibre and composites

Silicone bladders and intensifiers, caul plates, master plugs and layup tooling for motorsport, automotive, marine, UAV and sporting goods.

Read more
Race engineers working on a single-seater in the garage
Motorsport

Motorsport and high-performance automotive

Silicone bladders, intensifiers and reusable vacuum bags for carbon parts, plus wind tunnel parts and rubber seals, for race teams and their suppliers.

Read more
A boat hull on stands in a boatyard
Marine

Marine and boatbuilding

Reusable silicone vacuum bags, non-slip deck texture tooling, fitting moulds and rubber seals for yacht, RIB, workboat and marine component builders.

Read more

All industries

Start a programme

Tell us where your device is and what the next build needs.

We will recommend the route, list the documentation and quote the programme in stages.

Your project, our expertise

Talk through your next mould.

Contact TCI Mouldings with your drawings, samples and production requirements so the technical brief and next steps can be discussed.

  • A real Warwickshire workshopUnit 15, Waterloo Park, Bidford-on-Avon, Alcester B50 4JG.
  • Real people on the phoneCall the team on 01789 224228, Monday to Friday.
  • Agree your project contactsDesign, production and aftercare come from the people you see here.
  • Part of TCI GroupFour specialist divisions under TCI Group, one engineering team. Visit TCI Group.
Two engineers reviewing a three-dimensional model on a computer.
Two engineers reviewing a three-dimensional model on a computer. Representative stock photograph. Photo: Kumpan Electric
Hands measuring a circular component with a digital calliper.
Hands measuring a circular component with a digital calliper. Representative stock photograph. Photo: AFINIS Group ® - AFINIS GASKET® Production
Hands measuring a flexible black sealing ring with digital callipers beside manufacturing equipment.
Representative stock photograph: flexible sealing-component inspection, not TCI premises or a TCI project. Stock photo credit
  • Thomas LaneManaging Director
  • George PrestonDesign & Project Manager
  • Kelly BallingerHead of Partnerships
  • Jim AndertonProduction Manager
  • TheodoreEmployee Welfare
Meet the team