Bidford-on-Avon, Warwickshire. Mon to Fri.01789 224228

Industries · Industrial, electronics and wearables

Silicone tooling for industrial, electronics and wearables.

Potting and encapsulation moulds, gaskets and seals, compression-moulded keypads and wearable straps, from validation batches to production supply, built to your drawing.

CustomProject-led tooling
MaterialsSelected for the application
ScopeAgreed against your brief
ContactWarwickshire, UK

What industrial buyers need

Elastomer parts that fit first time and keep fitting.

Electronic circuit-board production equipment.
Electronic circuit-board production equipment. Representative application photograph. Photo: Louis Reed

Seals, pads, straps and encapsulated assemblies look simple until they leak, rattle or lose a logo after a few weeks of use.

We design the tool around the assembly, the critical dimensions and the environment the part will live in, then choose the silicone or polyurethane grade, hardness and moulding route to suit. Validation batches are measured against the drawing before production volumes are released.

Discuss the technical brief, review stages and project contacts with us when scoping your tooling.

Watch strap with a moulded logo

Typical industrial work

What we make for industrial and electronics manufacturers.

Six families of work cover most industrial enquiries.

Potting

Potting and encapsulation moulds

Reusable silicone moulds for potting PCBs, sensors and connectors, designed for clean release and consistent fill.

Sealing

Gaskets, seals and boots

Cast and compression-moulded gaskets, seals and protective boots in grades chosen for temperature and environment.

Interfaces

Keypads and soft-touch parts

Compression-moulded keypads, buttons and soft-touch components with crisp legends and consistent feel.

Wearables

Straps and wearable parts

Moulded straps, bands and wearable components with logos and textures held across every part.

Flatness

Flat silicone patch tooling

Illustrative geometry and tooling considerations, not a verified customer delivery.

Explore the worked example
Overmoulding

Insert and overmoulding

Silicone moulded around metal and plastic inserts for grips, seals and integrated assemblies.

Examples

What silicone and rubber can do in industrial, electronics and wearables.

Eight typical jobs for silicone, polyurethane and rubber tooling in this industry. Each one can be a single development tool or a full production set.

Enclosure seals: mating faces and fit. Labelled conceptual diagram, not a project photograph.
Concept diagram: Enclosure seals: mating faces and fit. Illustrative geometry, not a photograph or production drawing.
Open labelled diagram
01

Potting moulds

Reusable moulds that pot PCBs, connectors and sensors in resin.

Silicone
02

Keypads and buttons

Compression-moulded silicone keypads with legends and contact pills.

Silicone
03

Gaskets and O-rings

Custom gaskets, seals and O-rings for enclosures and fluid paths.

Silicone, EPDM
04

Wearable straps

Silicone straps and bands for watches, trackers and wearables.

Platinum silicone
05

Cable grommets and boots

Strain reliefs, grommets and connector boots.

Silicone, rubber
06

Thermal pads

Moulded pads that move heat away from electronics.

Thermally conductive silicone
07

Encapsulated sensors

Sealed sensor pucks and housings for harsh environments.

Silicone tool, PU
08

Anti-vibration mounts

Mounts and feet for equipment, fans and instruments.

Silicone, PU

Tooling ideas, clearly explained

How we show the tool is right before it reaches your line.

Larger customers ask the same questions: how is it checked, what is it made from, and can you make another one exactly the same? This is how we answer them.

Hands using a digital calliper to check a component.
Measured against your drawingFirst parts from every tool are measured against the drawing before production volumes are released.Hands using a digital calliper to check a component. Representative application photograph.
A circular rubber ring on a plain background.
Traceable materialsA material declaration is supplied with every order, and material data sheets are available on request. Food-contact moulds and their paperwork are supplied through our sister division TCI Culinary. A circular rubber ring on a plain background. Representative stock photograph. Photo: Tam DV
Machined metal components resting on an engineering drawing.
Masters archivedWe keep your masters and drawings on file so repeats are straightforward. Machined metal components resting on an engineering drawing. Representative stock photograph. Photo: EnCata PD
A packed carton ready for dispatch
. Photo: Brandable Box on Unsplash.Shipped with paperworkTools leave with the material declaration for your order, packed for the journey to your line.

Photos: Brandable Box, Jessica Streser, Wilhelm Gunkel, laura adai on Unsplash.

  • Fixed written quotesTooling price, cost per part and payment stages agreed up front. We'll confirm lead times on your quotation.
  • Please contact us before sending sensitive drawings or samples so that any confidentiality arrangements can be agreed.
  • Discuss the technical brief, review stages and project contacts with us when scoping your tooling.
  • Designed in WarwickshireA Warwickshire mould shop, part of TCI Group.
  • Staged approvalsFeasibility, development, validation and production, each on its own PO.
  • Any tooling-specific terms, expected service conditions and remedies must be confirmed in your written quotation and order agreement.

How we work with engineering teams

What comes with every industrial programme.

Discuss confidentiality

Please contact us before sending sensitive drawings or samples so that any confidentiality arrangements can be agreed.

Project communication

You have a named contact for your programme, from feasibility to repeat supply, and is the person your engineering, quality and procurement teams speak to.

Documentation procurement recognises

Material documentation, inspection requirements, manufacturing responsibilities and any necessary approvals should be specified and confirmed for your project before work is authorised.

Project terms

Any tooling-specific terms, expected service conditions and remedies must be confirmed in your written quotation and order agreement.

Colourful phone cases.
Colourful phone cases. Representative moulded-product photograph, not TCI production. Photo: Behar Zenuni

Programme stages

From drawing to production supply.

  1. Drawing and assembly review

    We review the part, the assembly it sits in and the critical dimensions.

  2. Discuss confidentiality

    Please contact us before sending sensitive drawings or samples so that any confidentiality arrangements can be agreed.

  3. Validation tooling

    A first tool and validation batch measured against the drawing.

  4. Production tooling

    Compression, multi-cavity or LSR production tooling for your volumes.

  5. Repeat supply

    Scheduled production, spares and archived masters for repeat orders.

Questions from industrial buyers

What engineering and procurement teams usually ask.

Can you mould around electronics or inserts?

Yes. Potting, encapsulation and overmoulding around PCBs, sensors and metal inserts are common requests. We review the assembly, temperature limits and sealing needs before proposing a route.

What tolerances can silicone and compression tooling hold?

It depends on part size, hardness and geometry. We agree the critical dimensions and inspection method with you before the tool is built, and report against them on the first parts.

Can you produce parts as well as tooling?

Yes. We run validation batches and production quantities here, or hand over the tooling for you or your contract manufacturer to run.

What does a typical industrial programme cost?

Pricing depends on your design, materials, quantities and tooling scope. Ask us for a quotation against your project brief.

Related industries

Other industries we tool for.

A row of cast face replicas mounted on a studio wall
Film and TV

Film, TV and special effects

Silicone and rubber moulds for prop houses, creature and prosthetic workshops and art departments: hero props, stunt doubles, prosthetics and set dressing.

Read more
A cast dinosaur skull replica on display in a museum
Attractions

Theme parks, museums and attractions

Large rubber moulds for theming, rockwork and themed panels, museum-grade replicas of artefacts and specimens, and repeat exhibition pieces.

Read more
Foundry workers pouring molten metal into casting moulds
Fine art

Fine art, sculpture and foundries

Silicone moulds and jackets for sculptors, galleries and art foundries: bronze edition moulds, wax pattern tooling, resin and Jesmonite editions.

Read more

All industries

Start a programme

Send the drawing and the assembly it fits.

We will propose the route, the inspection plan and a fixed programme price.

Your project, our expertise

Talk through your next mould.

Contact TCI Mouldings with your drawings, samples and production requirements so the technical brief and next steps can be discussed.

  • A real Warwickshire workshopUnit 15, Waterloo Park, Bidford-on-Avon, Alcester B50 4JG.
  • Real people on the phoneCall the team on 01789 224228, Monday to Friday.
  • Agree your project contactsDesign, production and aftercare come from the people you see here.
  • Part of TCI GroupFour specialist divisions under TCI Group, one engineering team. Visit TCI Group.
Two engineers reviewing a three-dimensional model on a computer.
Two engineers reviewing a three-dimensional model on a computer. Representative stock photograph. Photo: Kumpan Electric
Hands measuring a circular component with a digital calliper.
Hands measuring a circular component with a digital calliper. Representative stock photograph. Photo: AFINIS Group ® - AFINIS GASKET® Production
Hands measuring a flexible black sealing ring with digital callipers beside manufacturing equipment.
Representative stock photograph: flexible sealing-component inspection, not TCI premises or a TCI project. Stock photo credit
  • Thomas LaneManaging Director
  • George PrestonDesign & Project Manager
  • Kelly BallingerHead of Partnerships
  • Jim AndertonProduction Manager
  • TheodoreEmployee Welfare
Meet the team