Bidford-on-Avon, Warwickshire. Mon to Fri.01789 224228

Industries · Energy, offshore and subsea

Moulds for energy, offshore and subsea parts.

Tooling for large cast polyurethane and elastomer parts: cable protection, bend restrictors and stiffener sections, buoyancy and clamp components, pads, bumpers and seals, and silicone tooling for wind blade repair and composite parts. For offshore wind, oil and gas, subsea and grid suppliers.

CustomProject-led tooling
MaterialsSelected for the application
ScopeAgreed against your brief
ContactWarwickshire, UK

What energy suppliers need

Heavy-duty parts made the same way, every time, for decades of service.

An offshore platform at sea
An offshore platform at sea. Representative photograph. Photo: Arvind Vallabh

Subsea and offshore parts are expensive to fit and very expensive to fail. The tooling behind them has to produce the same part, with the same wall and the same fixings, every pour.

We build large moulds and cores for cast polyurethane and elastomer parts, with inserts and fixings located precisely, and silicone cauls, pads and soft tooling for wind blade and composite work. Tooling is designed for your casting system, cure and demould handling, including lifting points for heavy parts.

Material documentation, inspection requirements, manufacturing responsibilities and any necessary approvals should be specified and confirmed for your project before work is authorised.

Our moulding processes

Typical energy work

What we make for energy and offshore suppliers.

Six families of tooling cover most enquiries in this industry.

Subsea

Bend restrictors and stiffener sections

Large interlocking polyurethane sections cast in matched tooling, with inserts and clamps located.

Cable

Cable and pipe protection

Moulds for protective shells, saddles and spacers for cable and pipeline installations.

Buoyancy

Buoyancy and clamp components

Tooling for clamp liners, pads and buoyancy component shells.

Wind

Blade repair and composite tooling

Silicone cauls, pads and bladders for blade repairs, root inserts and nacelle components.

Wear

Pads, bumpers and wear parts

Moulds for polyurethane wear pads, fenders, bumpers and impact protection.

Sealing

Seals, gaskets and grommets

Compression-moulded and cast seals for enclosures, hatches and cable entries.

Parts and tooling

Choosing the tooling for the part.

A general guide. Geometry, material and volume decide the final tool.

Typical guide values, confirmed on your quotation. We confirm grade, tool life and lead time against your part and process.

PartTypical toolingTypical materialWhy it matters
Bend restrictor sectionRigid-backed mould with coresCast polyurethaneInterlocks fit across every section
Cable protection shellLarge supported mouldCast polyurethaneConsistent wall and fixings
Blade repair caulSilicone caul or padComposite laminateEven pressure on curved surfaces
Wear pads and bumpersMulti-cavity PU toolingPolyurethane elastomerRepeatable hardness and fit
Seals and gasketsCompression toolingEPDM, silicone, FKMWeatherproof, to profile

Send the drawing, the material and the quantities with your enquiry so we can confirm the route before quoting.

Examples

What silicone and rubber can do in energy, offshore and subsea.

Eight typical jobs for silicone, polyurethane and rubber tooling in this industry. Each one can be a single development tool or a full production set.

Sealing profiles: shape, tool and fit check. Labelled conceptual diagram, not a project photograph.
Concept diagram: Sealing profiles: shape, tool and fit check. Illustrative geometry, not a photograph or production drawing.
Open labelled diagram
01

Bend restrictors

Interlocking polyurethane sections that protect cables and flexibles.

PU elastomer
02

Bend stiffeners

Tapered polyurethane stiffeners at cable and riser terminations.

PU elastomer
03

Buoyancy modules

Moulded shells and covers for buoyancy and protection.

PU, syntactic route
04

Cable protection sleeves

Abrasion and impact sleeves for cables and umbilicals.

PU elastomer
05

Large seals and gaskets

Custom seals for hatches, housings and flanges.

EPDM, silicone, PU
06

Wind turbine parts

Blade leading-edge parts, covers and grommets.

PU, silicone
07

Clamps and saddles

Rubber-lined clamps and pipe saddles.

PU elastomer
08

Anti-vibration and wear pads

Pads for skids, cranes and handling equipment.

PU elastomer

Tooling ideas, clearly explained

How we show the tool is right before it reaches your line.

Larger customers ask the same questions: how is it checked, what is it made from, and can you make another one exactly the same? This is how we answer them.

Hands using a digital calliper to check a component.
Measured against your drawingFirst parts from every tool are measured against the drawing before production volumes are released.Hands using a digital calliper to check a component. Representative application photograph.
A circular rubber ring on a plain background.
Traceable materialsA material declaration is supplied with every order, and material data sheets are available on request. Food-contact moulds and their paperwork are supplied through our sister division TCI Culinary. A circular rubber ring on a plain background. Representative stock photograph. Photo: Tam DV
Machined metal components resting on an engineering drawing.
Masters archivedWe keep your masters and drawings on file so repeats are straightforward. Machined metal components resting on an engineering drawing. Representative stock photograph. Photo: EnCata PD
A packed carton ready for dispatch
. Photo: Brandable Box on Unsplash.Shipped with paperworkTools leave with the material declaration for your order, packed for the journey to your line.

Photos: Brandable Box, Jessica Streser, Wilhelm Gunkel, laura adai on Unsplash.

  • Fixed written quotesTooling price, cost per part and payment stages agreed up front. We'll confirm lead times on your quotation.
  • Please contact us before sending sensitive drawings or samples so that any confidentiality arrangements can be agreed.
  • Discuss the technical brief, review stages and project contacts with us when scoping your tooling.
  • Designed in WarwickshireA Warwickshire mould shop, part of TCI Group.
  • Staged approvalsFeasibility, development, validation and production, each on its own PO.
  • Any tooling-specific terms, expected service conditions and remedies must be confirmed in your written quotation and order agreement.

How we work

What comes with every programme.

Discuss confidentiality

Please contact us before sending sensitive drawings or samples so that any confidentiality arrangements can be agreed.

Project communication

You have a named contact for your programme, from feasibility to repeat supply, and is the person your engineering, quality and procurement teams speak to.

Documentation procurement recognises

Material documentation, inspection requirements, manufacturing responsibilities and any necessary approvals should be specified and confirmed for your project before work is authorised.

Project terms

Any tooling-specific terms, expected service conditions and remedies must be confirmed in your written quotation and order agreement.

A wind turbine blade being transported by road.
A wind turbine blade being transported by road. Representative energy-sector photograph. Photo: Colin Watts

Programme stages

From brief to production tooling.

  1. Brief and review

    We review the part, the material, the quantities and the deadline, and propose the tooling.

  2. Discuss confidentiality

    Please contact us before sending sensitive drawings or samples so that any confidentiality arrangements can be agreed.

  3. Master and first tool

    Master made from your CAD, scan or original, and the first tool trialled.

  4. Refinement

    Fit, finish and release tuned from the trial before tools are duplicated.

  5. Production sets and spares

    Matched sets, planned replacements and archived masters.

Common questions

What buyers in this industry usually ask.

Can you work to our specification and quality plan?

Material documentation, inspection requirements, manufacturing responsibilities and any necessary approvals should be specified and confirmed for your project before work is authorised.

Can you make the finished parts?

Our focus is the tooling and masters. Finished part casting can be managed through our vetted partner network within the programme, or run by your own casting team.

How big can the tooling be?

We build large tools in sections with rigid frames and lifting points. Send the part envelope and weight and we will propose the build.

What does a typical programme cost?

Pricing depends on your design, materials, quantities and tooling scope. Ask us for a quotation against your project brief.

Related industries

Other industries we tool for.

A high-speed train at a station platform
Rail

Rail, transport and specialist vehicles

Tooling for seals, gaskets, interior trim, composite panels and low-volume parts for rail, bus, coach, defence and specialist vehicle manufacturers.

Read more
Pneumatic grippers and actuators on an automated assembly cell
Robotics

Robotics and automation

Moulds for soft robotic grippers, vacuum cups, finger pads, bellows and protective covers for robot makers, integrators and automated production lines.

Read more
A clinician fitting a prosthetic hand
Prosthetics

Prosthetics, orthotics and clinical simulation

Moulds for prosthetic covers and liners, orthotic pads, facial and body prostheses, and lifelike clinical training and simulation models.

Read more

All industries

Start a programme

Send the drawing, the material and the annual volume.

We will propose the tooling, the documentation and a fixed programme price.

Your project, our expertise

Talk through your next mould.

Contact TCI Mouldings with your drawings, samples and production requirements so the technical brief and next steps can be discussed.

  • A real Warwickshire workshopUnit 15, Waterloo Park, Bidford-on-Avon, Alcester B50 4JG.
  • Real people on the phoneCall the team on 01789 224228, Monday to Friday.
  • Agree your project contactsDesign, production and aftercare come from the people you see here.
  • Part of TCI GroupFour specialist divisions under TCI Group, one engineering team. Visit TCI Group.
Two engineers reviewing a three-dimensional model on a computer.
Two engineers reviewing a three-dimensional model on a computer. Representative stock photograph. Photo: Kumpan Electric
Hands measuring a circular component with a digital calliper.
Hands measuring a circular component with a digital calliper. Representative stock photograph. Photo: AFINIS Group ® - AFINIS GASKET® Production
Hands measuring a flexible black sealing ring with digital callipers beside manufacturing equipment.
Representative stock photograph: flexible sealing-component inspection, not TCI premises or a TCI project. Stock photo credit
  • Thomas LaneManaging Director
  • George PrestonDesign & Project Manager
  • Kelly BallingerHead of Partnerships
  • Jim AndertonProduction Manager
  • TheodoreEmployee Welfare
Meet the team