Bidford-on-Avon, Warwickshire. Mon to Fri.01789 224228

Industries · Fine art, sculpture and foundries

Silicone moulds for sculptors, galleries and art foundries.

Edition moulds that capture every tool mark in the original, wax pattern tooling for lost-wax bronze casting, and production moulds for resin, Jesmonite and cold-cast editions. For artists, estates, galleries and the foundries that cast their work.

CustomProject-led tooling
MaterialsSelected for the application
ScopeAgreed against your brief
ContactWarwickshire, UK

What artists and foundries need

A mould that is faithful to the original, for the whole edition.

A sculptor building up a large figure
A sculptor building up a large figure. Representative photograph. Photo: Ilia Zolas

An edition is only as good as its mould. Every casting has to carry the artist’s surface, and the last of the edition has to match the first.

We take silicone moulds from originals in clay, plaster, wood, stone and bronze, with rigid jackets and seam lines placed where the foundry and the artist agree. For lost-wax bronze, we supply moulds tuned for wax injection or slush casting, so the foundry gets consistent patterns.

Moulds can be archived on behalf of the artist or estate, with a record of the edition, so authorised later castings can be traced back to the original mould.

Our moulding processes

Typical fine art work

What we make for artists and foundries.

Six families of tooling cover most enquiries in this industry.

Bronze

Wax pattern moulds for lost-wax casting

Silicone moulds with jackets for wax patterns, built to suit the foundry’s pour and handling.

Editions

Resin, Jesmonite and cold-cast editions

Production moulds for limited and open editions in resin, Jesmonite, plaster and cold-cast metal.

Monumental

Large and public sculpture

Sectional moulds for large works, split to suit the foundry and reassembled to the original.

Enlargement

Scan, scale and master

3D scanning, enlargement or reduction, and printed or machined masters for new sizes of a work.

Restoration

Replacement parts for damaged works

Moulds from surviving sections to replace lost or damaged elements of existing sculpture.

Archive

Mould storage and edition records

Mould storage and edition records can be arranged for artists, estates and galleries; we'll agree terms on your quotation.

Parts and tooling

Matching the mould to the edition.

A general guide. Geometry, material and volume decide the final tool.

Typical guide values, confirmed on your quotation. We confirm grade, tool life and lead time against your part and process.

EditionTypical mouldTypical castingWhy it matters
Bronze editionSilicone with rigid jacketWax pattern, then bronzeConsistent wax walls for the foundry
Resin or cold-castPlatinum siliconePolyurethane, polyester, metal-filledFine surface, many pulls
Jesmonite and plasterTin or platinum siliconeJesmonite, plasterCrisp detail, quick turnaround
Monumental workSectional silicone and GRP jacketWax sections, bronze, GRPManageable sections, clean joins
Restoration partSilicone from surviving sectionTo match the originalNew part matches the old

Send the drawing, the material and the quantities with your enquiry so we can confirm the route before quoting.

Examples

What silicone and rubber can do in fine art, sculpture and foundries.

Eight typical jobs for silicone, polyurethane and rubber tooling in this industry. Each one can be a single development tool or a full production set.

Sculpture detail: surface, mould and release. Labelled conceptual diagram, not a project photograph.
Concept diagram: Sculpture detail: surface, mould and release. Illustrative geometry, not a photograph or production drawing.
Open labelled diagram
01

Bronze edition moulds

Moulds for wax patterns in lost-wax bronze casting.

Silicone, jacketed
02

Resin and Jesmonite editions

Production moulds for limited and open editions.

Silicone
03

Cold-cast metal

Moulds for cold-cast bronze, copper and iron editions.

Silicone
04

Monumental sculpture

Sectional moulds for large public works.

Silicone, jacketed
05

Enlargements and reductions

Scan, scale and master for new sizes of a work.

Printed master, silicone
06

Maquettes

Moulds for small studies and presentation models.

Silicone
07

Restoration parts

Replacement elements for damaged sculpture.

Silicone
08

Estate archives

Stored, recorded moulds for authorised later castings.

Silicone

Tooling ideas, clearly explained

How we show the tool is right before it reaches your line.

Larger customers ask the same questions: how is it checked, what is it made from, and can you make another one exactly the same? This is how we answer them.

Hands using a digital calliper to check a component.
Measured against your drawingFirst parts from every tool are measured against the drawing before production volumes are released.Hands using a digital calliper to check a component. Representative application photograph.
A circular rubber ring on a plain background.
Traceable materialsA material declaration is supplied with every order, and material data sheets are available on request. Food-contact moulds and their paperwork are supplied through our sister division TCI Culinary. A circular rubber ring on a plain background. Representative stock photograph. Photo: Tam DV
Machined metal components resting on an engineering drawing.
Masters archivedWe keep your masters and drawings on file so repeats are straightforward. Machined metal components resting on an engineering drawing. Representative stock photograph. Photo: EnCata PD
A packed carton ready for dispatch
. Photo: Brandable Box on Unsplash.Shipped with paperworkTools leave with the material declaration for your order, packed for the journey to your line.

Photos: Brandable Box, Jessica Streser, Wilhelm Gunkel, laura adai on Unsplash.

  • Fixed written quotesTooling price, cost per part and payment stages agreed up front. We'll confirm lead times on your quotation.
  • Please contact us before sending sensitive drawings or samples so that any confidentiality arrangements can be agreed.
  • Discuss the technical brief, review stages and project contacts with us when scoping your tooling.
  • Designed in WarwickshireA Warwickshire mould shop, part of TCI Group.
  • Staged approvalsFeasibility, development, validation and production, each on its own PO.
  • Any tooling-specific terms, expected service conditions and remedies must be confirmed in your written quotation and order agreement.

How we work

What comes with every programme.

Discuss confidentiality

Please contact us before sending sensitive drawings or samples so that any confidentiality arrangements can be agreed.

Project communication

You have a named contact for your programme, from feasibility to repeat supply, and is the person your engineering, quality and procurement teams speak to.

Documentation procurement recognises

Material documentation, inspection requirements, manufacturing responsibilities and any necessary approvals should be specified and confirmed for your project before work is authorised.

Project terms

Any tooling-specific terms, expected service conditions and remedies must be confirmed in your written quotation and order agreement.

A mould maker working on a large plaster mould in a casting workshop
A mould maker working on a large plaster mould in a casting workshop. Representative photograph. Photo: East Riding Archives

Programme stages

From brief to production tooling.

  1. Brief and review

    We review the part, the material, the quantities and the deadline, and propose the tooling.

  2. Discuss confidentiality

    Please contact us before sending sensitive drawings or samples so that any confidentiality arrangements can be agreed.

  3. Master and first tool

    Master made from your CAD, scan or original, and the first tool trialled.

  4. Refinement

    Fit, finish and release tuned from the trial before tools are duplicated.

  5. Production sets and spares

    Matched sets, planned replacements and archived masters.

Common questions

What buyers in this industry usually ask.

Will moulding damage my original?

We choose release agents and silicones to suit the original material and agree the method with you first. For fragile or valuable pieces, we can work from a high-resolution scan instead of the object.

Can you keep the mould for the edition?

Yes. We can archive moulds with an edition record, or deliver them to your foundry. Moulds are never used for anyone else.

Do you cast bronze?

No. We make the moulds and wax tooling, and work alongside your chosen art foundry.

What does a typical project cost?

Pricing depends on your design, materials, quantities and tooling scope. Ask us for a quotation against your project brief.

Related industries

Other industries we tool for.

Molten metal being poured in a jewellery casting workshop
Luxury

Jewellery, watches and luxury goods

Vulcanised rubber and silicone moulds for jewellery houses, watch brands and luxury goods makers: wax injection tooling, straps, hardware and packaging inserts.

Read more
A cast stone basin and vanity in a high-end bathroom
Interiors

Luxury interiors, furniture and bathrooms

Moulds for bespoke concrete, Jesmonite, terrazzo and composite basins, baths, worktops, wall panels, furniture and lighting for high-end interiors.

Read more
An ornate plaster ceiling rose and coffered ceiling
Heritage

Heritage restoration and conservation

Moulds for replicating carved stone, ornamental plaster, terracotta, cast iron and timber details on listed buildings, cathedrals, estates and monuments.

Read more

All industries

Start a programme

Send photographs or a scan of the work and the edition size.

We will propose the mould, the jacket and a fixed price for the edition.

Your project, our expertise

Talk through your next mould.

Contact TCI Mouldings with your drawings, samples and production requirements so the technical brief and next steps can be discussed.

  • A real Warwickshire workshopUnit 15, Waterloo Park, Bidford-on-Avon, Alcester B50 4JG.
  • Real people on the phoneCall the team on 01789 224228, Monday to Friday.
  • Agree your project contactsDesign, production and aftercare come from the people you see here.
  • Part of TCI GroupFour specialist divisions under TCI Group, one engineering team. Visit TCI Group.
Two engineers reviewing a three-dimensional model on a computer.
Two engineers reviewing a three-dimensional model on a computer. Representative stock photograph. Photo: Kumpan Electric
Hands measuring a circular component with a digital calliper.
Hands measuring a circular component with a digital calliper. Representative stock photograph. Photo: AFINIS Group ® - AFINIS GASKET® Production
Hands measuring a flexible black sealing ring with digital callipers beside manufacturing equipment.
Representative stock photograph: flexible sealing-component inspection, not TCI premises or a TCI project. Stock photo credit
  • Thomas LaneManaging Director
  • George PrestonDesign & Project Manager
  • Kelly BallingerHead of Partnerships
  • Jim AndertonProduction Manager
  • TheodoreEmployee Welfare
Meet the team