Bidford-on-Avon, Warwickshire. Mon to Fri.01789 224228

Industries · Luxury interiors, furniture and bathrooms

Moulds for luxury interiors, furniture and bathrooms.

Silicone and supported rubber moulds for cast basins, baths, worktops and wall panels in concrete, Jesmonite, terrazzo, cast marble and composite stone, plus sculpted furniture, lighting and decorative elements. For interior designers, fit-out contractors, superyacht and hotel interiors and the makers who supply them.

CustomProject-led tooling
MaterialsSelected for the application
ScopeAgreed against your brief
ContactWarwickshire, UK

What designers and fit-out teams need

A bespoke piece, repeated across every room of the project.

A cast stone basin in a bathroom
A cast stone basin in a bathroom. Representative photograph. Photo: Sanibell BV

A hotel, a residence or a superyacht wants one design carried through every suite. The basin in room 212 has to match the one in the show room.

We build moulds that release cast basins and baths with crisp edges, integrated overflows and fixing points, and textured wall panels that line up from one to the next. Grades are chosen for the casting material and finish, from glass-smooth to fine stone texture.

Material documentation, inspection requirements, manufacturing responsibilities and any necessary approvals should be specified and confirmed for your project before work is authorised.

Our moulding processes

Typical interiors work

What we make for interiors.

Six families of tooling cover most enquiries in this industry.

Bathrooms

Basins, baths and shower trays

Moulds for cast basins, freestanding baths and trays with integrated wastes and fixings.

Surfaces

Worktops, vanity tops and sills

Long supported moulds for cast tops with drip edges, upstands and integrated sinks.

Walls

Textured and sculpted wall panels

Moulds for 3D wall panels, fluted and reeded finishes, and bespoke relief that tiles seamlessly.

Furniture

Cast furniture and tables

Tooling for cast stone, concrete and resin tables, benches, stools and planters.

Lighting

Lamp bases and shades

Moulds for cast lamp bases, pendants and wall lights in plaster, concrete, Jesmonite and resin.

Marine

Superyacht interiors

Lightweight cast and composite interior pieces made to marine weight and fixing requirements.

Parts and tooling

Matching the mould to the piece.

A general guide. Geometry, material and volume decide the final tool.

Typical guide values, confirmed on your quotation. We confirm grade, tool life and lead time against your part and process.

PieceTypical mouldTypical castingWhy it matters
Basin or bathSupported silicone or PU with coreConcrete, Jesmonite, cast marbleThin walls, crisp edges, wastes in place
Worktop and vanity topLong supported PUConcrete, terrazzoFlat, true and matching lengths
Wall panelsSilicone texture mouldsJesmonite, GRC, plasterSeamless repeat across a wall
FurnitureMulti-part supported rubberConcrete, resin, cast stoneUndercuts and fixings moulded in
LightingSilicone with corePlaster, Jesmonite, resinFine detail and cable routes

Send the drawing, the material and the quantities with your enquiry so we can confirm the route before quoting.

Examples

What silicone and rubber can do in luxury interiors, furniture and bathrooms.

Eight typical jobs for silicone, polyurethane and rubber tooling in this industry. Each one can be a single development tool or a full production set.

Hollow castings: form, core and release. Concept diagram.
Hollow castings: form, core and release. Concept diagram. Concept diagram, not a project photograph.
Open labelled diagram
01

Cast stone basins and baths

Moulds for sculpted basins, baths and vanity tops.

Silicone, supported PU
02

Relief wall panels

Repeat panels with carved, fluted and geometric relief.

Silicone, PU
03

Ceiling roses and cornices

Plaster mouldings that match period interiors.

Silicone
04

Terrazzo and concrete tables

Moulds for table tops, bases and side tables.

Supported PU
05

Fireplace surrounds

Moulds for cast stone and plaster fire surrounds.

Supported PU
06

Lighting

Cast lamp bases, shades and sculptural fittings.

Silicone
07

Hardware and handles

Masters and moulds for bespoke handles and fittings.

Silicone
08

Hotel and yacht fit-out

Repeat pieces made to match across many rooms or decks.

Silicone, PU

Tooling ideas, clearly explained

How we show the tool is right before it reaches your line.

Larger customers ask the same questions: how is it checked, what is it made from, and can you make another one exactly the same? This is how we answer them.

Hands using a digital calliper to check a component.
Measured against your drawingFirst parts from every tool are measured against the drawing before production volumes are released.Hands using a digital calliper to check a component. Representative application photograph.
A circular rubber ring on a plain background.
Traceable materialsA material declaration is supplied with every order, and material data sheets are available on request. Food-contact moulds and their paperwork are supplied through our sister division TCI Culinary. A circular rubber ring on a plain background. Representative stock photograph. Photo: Tam DV
Machined metal components resting on an engineering drawing.
Masters archivedWe keep your masters and drawings on file so repeats are straightforward. Machined metal components resting on an engineering drawing. Representative stock photograph. Photo: EnCata PD
A packed carton ready for dispatch
. Photo: Brandable Box on Unsplash.Shipped with paperworkTools leave with the material declaration for your order, packed for the journey to your line.

Photos: Brandable Box, Jessica Streser, Wilhelm Gunkel, laura adai on Unsplash.

  • Fixed written quotesTooling price, cost per part and payment stages agreed up front. We'll confirm lead times on your quotation.
  • Please contact us before sending sensitive drawings or samples so that any confidentiality arrangements can be agreed.
  • Discuss the technical brief, review stages and project contacts with us when scoping your tooling.
  • Designed in WarwickshireA Warwickshire mould shop, part of TCI Group.
  • Staged approvalsFeasibility, development, validation and production, each on its own PO.
  • Any tooling-specific terms, expected service conditions and remedies must be confirmed in your written quotation and order agreement.

How we work

What comes with every programme.

Discuss confidentiality

Please contact us before sending sensitive drawings or samples so that any confidentiality arrangements can be agreed.

Project communication

You have a named contact for your programme, from feasibility to repeat supply, and is the person your engineering, quality and procurement teams speak to.

Documentation procurement recognises

Material documentation, inspection requirements, manufacturing responsibilities and any necessary approvals should be specified and confirmed for your project before work is authorised.

Project terms

Any tooling-specific terms, expected service conditions and remedies must be confirmed in your written quotation and order agreement.

Machined metal components resting on an engineering drawing.
Machined metal components resting on an engineering drawing. Representative stock photograph. Photo: EnCata PD

Programme stages

From brief to production tooling.

  1. Brief and review

    We review the part, the material, the quantities and the deadline, and propose the tooling.

  2. Discuss confidentiality

    Please contact us before sending sensitive drawings or samples so that any confidentiality arrangements can be agreed.

  3. Master and first tool

    Master made from your CAD, scan or original, and the first tool trialled.

  4. Refinement

    Fit, finish and release tuned from the trial before tools are duplicated.

  5. Production sets and spares

    Matched sets, planned replacements and archived masters.

Common questions

What buyers in this industry usually ask.

Can you work from the designer’s drawings?

Yes. We work from drawings, CAD or a physical sample, produce a master and confirm finish and tolerances with you before the production mould is made.

Can you match a finish across a whole project?

Yes. Matched moulds from one master, with the same grade and texture, give consistent pieces across every room and every phase.

Do you cast and install?

Our focus is the moulds and masters. Casting and installation can be arranged through partners or done by your own maker.

What does a typical project cost?

Pricing depends on your design, materials, quantities and tooling scope. Ask us for a quotation against your project brief.

Related industries

Other industries we tool for.

An ornate plaster ceiling rose and coffered ceiling
Heritage

Heritage restoration and conservation

Moulds for replicating carved stone, ornamental plaster, terracotta, cast iron and timber details on listed buildings, cathedrals, estates and monuments.

Read more
An offshore jack-up rig standing in open water
Energy

Energy, offshore and subsea

Tooling for cast polyurethane and elastomer parts in offshore wind, oil and gas, subsea and grid infrastructure: bend restrictors, cable protection, buoyancy and seals.

Read more
A high-speed train at a station platform
Rail

Rail, transport and specialist vehicles

Tooling for seals, gaskets, interior trim, composite panels and low-volume parts for rail, bus, coach, defence and specialist vehicle manufacturers.

Read more

All industries

Start a programme

Send the drawings, the finish and the number of rooms.

We will propose the moulds, the casting route and a fixed programme price.

Your project, our expertise

Talk through your next mould.

Contact TCI Mouldings with your drawings, samples and production requirements so the technical brief and next steps can be discussed.

  • A real Warwickshire workshopUnit 15, Waterloo Park, Bidford-on-Avon, Alcester B50 4JG.
  • Real people on the phoneCall the team on 01789 224228, Monday to Friday.
  • Agree your project contactsDesign, production and aftercare come from the people you see here.
  • Part of TCI GroupFour specialist divisions under TCI Group, one engineering team. Visit TCI Group.
Two engineers reviewing a three-dimensional model on a computer.
Two engineers reviewing a three-dimensional model on a computer. Representative stock photograph. Photo: Kumpan Electric
Hands measuring a circular component with a digital calliper.
Hands measuring a circular component with a digital calliper. Representative stock photograph. Photo: AFINIS Group ® - AFINIS GASKET® Production
Hands measuring a flexible black sealing ring with digital callipers beside manufacturing equipment.
Representative stock photograph: flexible sealing-component inspection, not TCI premises or a TCI project. Stock photo credit
  • Thomas LaneManaging Director
  • George PrestonDesign & Project Manager
  • Kelly BallingerHead of Partnerships
  • Jim AndertonProduction Manager
  • TheodoreEmployee Welfare
Meet the team