
Aerospace and defence
Silicone and polyurethane tooling, masking and holding fixtures, and vacuum-cast validation parts, built to drawing with documented inspection.
Read moreIndustries
From aerospace, motorsport and subsea to film sets, museums, jewellery houses and listed buildings. One engineering team, twenty-three industries and silicone and rubber tooling built around what each one needs.
Custom silicone moulds for manufacturers
From engineering-led programmes to candle, soap, wax melt and food production, choose the moulding application closest to your project.
Engineering and transport
Composite, polyurethane and elastomer tooling for engineering-led manufacturers and their supply chains.

Silicone and polyurethane tooling, masking and holding fixtures, and vacuum-cast validation parts, built to drawing with documented inspection.
Read more
Silicone bladders, intensifiers and reusable vacuum bags for carbon parts, plus wind tunnel parts and rubber seals, for race teams and their suppliers.
Read more
Reusable silicone vacuum bags, non-slip deck texture tooling, fitting moulds and rubber seals for yacht, RIB, workboat and marine component builders.
Read more
Silicone bladders and intensifiers, caul plates, master plugs and layup tooling for motorsport, automotive, marine, UAV and sporting goods.
Read more
Tooling for cast polyurethane and elastomer parts in offshore wind, oil and gas, subsea and grid infrastructure: bend restrictors, cable protection, buoyancy and seals.
Read more
Tooling for seals, gaskets, interior trim, composite panels and low-volume parts for rail, bus, coach, defence and specialist vehicle manufacturers.
Read moreMedical and industrial
Device and clinical tooling, soft robotics, industrial elastomers and production-line tooling for food and cosmetics manufacturers.

Development and bridge tooling, skin-contact silicone parts, anatomical models and LSR routes for device manufacturers and their design partners.
Read more
Line-sized moulds, depositing trays and branded shapes for chocolate, confectionery, bakery, frozen dessert and ready-meal manufacturers, made through our sister division TCI Culinary.
Read more
Multi-cavity production tooling for candle, soap, wax melt and home fragrance manufacturers, sized to your line and supplied as matched sets with spares.
Read more
Moulds for prosthetic covers and liners, orthotic pads, facial and body prostheses, and lifelike clinical training and simulation models.
Read more
Moulds for soft robotic grippers, vacuum cups, finger pads, bellows and protective covers for robot makers, integrators and automated production lines.
Read more
Potting and encapsulation moulds, gaskets and seals, compression-moulded keypads and wearable straps, from validation batches to production supply.
Read more
Production moulds for lipstick, balm, solid perfume, shampoo bars and solid skincare, plus applicators and packaging inserts for prestige and contract cosmetics manufacturers.
Read moreConstruction and concrete
Moulds and formliners for precast, civil and public realm concrete, heritage restoration, luxury interiors and themed attractions.

Supported polyurethane and silicone moulds for precast, GRC, cast stone, formliners and heritage reproduction, with rigid jackets that hold shape.
Read more
Large formliners, supported rubber moulds and rubber inserts for big precast and in-situ concrete: facade panels, bridge parapets, retaining walls, stairs and tunnel portals.
Read more
Supported rubber moulds for large concrete street furniture, planters, water features, paving, memorials and monuments in concrete, GRC and cast stone.
Read more
Moulds for replicating carved stone, ornamental plaster, terracotta, cast iron and timber details on listed buildings, cathedrals, estates and monuments.
Read more
Moulds for bespoke concrete, Jesmonite, terrazzo and composite basins, baths, worktops, wall panels, furniture and lighting for high-end interiors.
Read more
Large rubber moulds for theming, rockwork and themed panels, museum-grade replicas of artefacts and specimens, and repeat exhibition pieces.
Read moreCreative, luxury and consumer
Moulds for screen and stage, editions and foundries, luxury brands, fine dining and high-volume consumer production.

Silicone and rubber moulds for prop houses, creature and prosthetic workshops and art departments: hero props, stunt doubles, prosthetics and set dressing.
Read more
Silicone moulds and jackets for sculptors, galleries and art foundries: bronze edition moulds, wax pattern tooling, resin and Jesmonite editions.
Read more
Vulcanised rubber and silicone moulds for jewellery houses, watch brands and luxury goods makers: wax injection tooling, straps, hardware and packaging inserts.
Read more
High-end custom food-contact moulds for restaurant groups, luxury hotels and pastry kitchens, made through our sister division TCI Culinary: signature desserts, branded chocolate and banqueting tools.
Read more
Candle, soap, wax melt, bath, resin and chocolate businesses ready for their own custom design or first production set.
How we work with smaller brandsExample applications
Examples of the jobs our tooling routes do, from F1 and boatyards to film sets, museums, jewellery houses, subsea suppliers and production lines. If your part is cast, laid up, infused, potted or pressed, there is usually a rubber tool behind it.
Please contact us before sending sensitive drawings or samples so that any confidentiality arrangements can be agreed.
| Industry | Application | Tooling | What the tooling does |
|---|---|---|---|
| Motorsport | Carbon wishbones, push rods and suspension members | Silicone bladders | Pressurise hollow carbon tubes from inside so the laminate consolidates in one cure |
| Motorsport | Front and rear wing elements, endplates and flaps | Silicone intensifiers and cauls | Hold crisp trailing edges, corners and returns that a vacuum bag rounds off |
| Motorsport | Brake ducts, cooling ducts and intake trumpets | Soft mandrels and bladders | Form complex hollow shapes and still release from the finished part |
| Motorsport | Wind tunnel and scale model parts | Silicone tools for vacuum casting | Turn out quick-change aero parts in engineering polyurethane for testing |
| Motorsport | Grommets, boots, grips and cockpit seals | Cast and compression-moulded rubber | Short runs of elastomer parts without committing to steel tooling |
| Marine | Decks, hatches, consoles and hardtops | Reusable silicone vacuum bags | Repeat resin infusion with less consumable bagging, cutting waste and labour per part |
| Marine | Moulded-in non-slip deck patterns | Silicone texture tooling | Puts the same non-skid texture into every deck, panel and step |
| Marine | Hull and deck fittings, covers and trim | Silicone and polyurethane tooling | Small composite and cast parts that match the boat, run after run |
| Marine | Hatch, window and locker seals | Compression-moulded rubber | Weatherproof seals and gaskets moulded to the profile you need |
| Aerospace | Turbine blades, igniters and machined components | Silicone holding trays and nests | Locate and protect parts for handling, inspection and transit |
| Aerospace | Plating, coating and paint masking | High-temperature silicone boots and plugs | Reusable masking that seats the same way on every part |
| Aerospace | Airframe and interior composite parts | Silicone cauls and bladders | Even pressure on complex composite shapes through the cure |
| Medical | Device prototypes and bridge production | Silicone and polyurethane tooling | Clinical-look parts and short runs before production tooling |
| Medical | Anatomical and surgical training models | Silicone moulds | Realistic tissue-like models cast in soft silicone grades |
| Medical | Skin-contact pads, cushions and seals | Compression and LSR tooling | Repeatable soft-touch parts in tested silicone grades |
| Construction | Column capitals, bases and balustrades | Split, supported rubber moulds | Release deep undercuts and classical detail from large castings |
| Construction | Precast cladding panels and feature walls | Textured rubber formliners | Architectural texture and relief across repeat panels |
| Construction | Bridge parapets and retaining walls | Large reusable formliners | Consistent textured faces on big civil engineering pours |
| Construction | Copings, cornices, sills and string courses | Long-run supported moulds | Straight, matching lengths with returns that line up |
| Construction | Large planters, benches and street furniture | Supported polyurethane moulds | Heavy concrete and GRC pieces, demoulded by crane or forklift |
| Large precast | Storey-height facade and cladding panels | PU formliners in steel table moulds | The same texture and relief on every panel across a whole building |
| Large precast | Stair flights, terraces and stadium seating | Rubber nosings and recess formers | Anti-slip nosing and cast-in detail that steel moulds cannot release |
| Public realm | Fountains, rills and water features | Supported silicone and PU moulds | Smooth basins and falls that hold water, matched across a scheme |
| Public realm | Memorials, plaques and lettered stones | Silicone face with rigid jacket | Crisp lettering and carved detail, right first time |
| Renewables | Blade, nacelle and housing composite parts | Silicone cauls, pads and soft tooling | Even pressure on large composite repairs and component mouldings |
| Attractions | Theming, rockwork and large display pieces | Large silicone and rubber moulds | Repeatable textured panels and features in GRP, GRC and resin |
| Hospitality | Signature desserts and branded chocolate | Food-grade silicone moulds | The same sculpted piece across every kitchen in a group |
| Candles and soap | Pillar, vessel and wax melt production | Multi-cavity silicone production moulds | Matched sets sized to your line, with spares |
| Electronics | Potting and encapsulation of modules | Silicone potting moulds | Release cleanly from potting compounds, cycle after cycle |
| Electronics | Keypads, gaskets and wearable straps | Compression-moulded silicone | Production quantities of soft-touch and sealing parts |
| Film and TV | Hero props and soft stunt doubles | Matched silicone moulds from one master | Rigid hero and safe soft version that look identical on screen |
| Film and TV | Prosthetic appliances and creature skins | Precision silicone, epoxy and multi-part moulds | Fine blending edges and skins that seam cleanly over animatronics |
| Attractions | Museum replicas of fossils and artefacts | Conservation-approved or scan-based silicone moulds | Faithful replicas for touring and handling, original untouched |
| Fine art | Bronze sculpture editions | Silicone moulds with rigid jackets for wax patterns | Consistent wax patterns for the foundry across the whole edition |
| Jewellery | Rings, pendants and settings | Vulcanised rubber wax injection moulds | Hundreds of identical waxes for casting in precious metal |
| Luxury goods | Watch straps, badges and hardware | Compression and LSR tooling | Brand detail held crisp across every strap and trim |
| Interiors | Concrete and Jesmonite basins, baths and panels | Supported silicone and polyurethane moulds | Matching pieces in every suite of a hotel, residence or superyacht |
| Heritage | Carved stone, plaster cornices and terracotta | Silicone moulds taken in situ or from scans | Replacements that sit beside the original without standing out |
| Energy | Subsea bend restrictors and cable protection | Large rigid-backed moulds for cast polyurethane | Heavy-duty sections that interlock the same way every pour |
| Rail | Seal corners, interior trim and obsolete parts | Cast and compression tooling | Fleet volumes and spares without steel tooling |
| Robotics | Soft grippers, vacuum cups and pads | Multi-part moulds with removable cores | Air channels, walls and hardness held to design |
| Clinical | Prosthetic covers and surgical task trainers | Moulds from scans and multi-layer tooling | Lifelike skin, fat and muscle layers in graded silicones |
| Cosmetics | Lipstick bullets, balms and solid bars | Multi-cavity platinum silicone moulds | Flawless, branded product cavity after cavity |
| Food manufacturing | Chocolate, confectionery and bakery lines | Framed food-grade silicone line tooling | Moulds sized to the depositor, tray and tunnel |
Do not see your application? Send the drawing anyway. If a silicone or rubber tool is not the right answer, we will say so.
Who we work with

We work with manufacturers, OEMs, supply-chain partners, design consultancies and premium brands that need tooling to hold a specification, not just a shape.
Discuss the technical brief, review stages and project contacts with us when scoping your tooling.
Pricing depends on your design, materials, quantities and tooling scope. Ask us for a quotation against your project brief.
Across every industry
Please contact us before sending sensitive drawings or samples so that any confidentiality arrangements can be agreed.
One engineer owns your programme from feasibility to repeat supply, and is the person your engineering, quality and procurement teams speak to.
Material documentation, inspection requirements, manufacturing responsibilities and any necessary approvals should be specified and confirmed for your project before work is authorised.
Any tooling-specific terms, expected service conditions and remedies must be confirmed in your written quotation and order agreement.
Common questions
Pricing depends on your design, materials, quantities and tooling scope. Ask us for a quotation against your project brief.
Yes, if the part needs precise silicone, polyurethane or composite tooling. Send the drawing and we will tell you quickly whether we are the right fit.
Please include your required inspection, traceability and supplier-approval documents in the enquiry so their scope can be confirmed.
Start a programme
We will come back with the route, the documentation and a fixed programme price.
Your project, our expertise
Contact TCI Mouldings with your drawings, samples and production requirements so the technical brief and next steps can be discussed.



Thomas LaneManaging Director
George PrestonDesign & Project Manager
Kelly BallingerHead of Partnerships
Jim AndertonProduction Manager
TheodoreEmployee Welfare