Bidford-on-Avon, Warwickshire. Mon to Fri.01789 224228

Industries · Candle, soap and home fragrance manufacturing

Production tooling for candle and soap manufacturers.

Multi-cavity silicone and polyurethane tooling for mass manufacture: pillars, vessels, wax melts, soap bars and bath products, sized to your filling line and supplied as matched sets with planned spares.

CustomProject-led tooling
MaterialsSelected for the application
ScopeAgreed against your brief
ContactWarwickshire, UK

What manufacturers need

Tooling that keeps a production line running, week after week.

Rows of tealights with visible wicks.
Rows of tealights with visible wicks. Representative application photograph. Photo: Kayla Warner

At production volume, the mould is a line component. Cavity count, pitch, release and tool life decide your output per shift and your cost per unit.

We design candle, wax melt, soap and bath product tooling around your filling equipment, cooling time and packing format. Cavities are pitched to your filling heads, trays are sized to your racks and conveyors, and wick location, logo relief and parting lines are designed in so finished units need no trimming.

Tools are supplied as matched sets from one archived master, so units from different lines and sites stay consistent. Spares and replacement cycles are planned into the programme so a worn tool is less likely to stop a line in peak season.

Multi-cavity tealight mould

Typical production work

What we make for candle, soap and home fragrance manufacturers.

Six families of production tooling cover most of this work.

Candles

Pillar and shaped candle tooling

Multi-cavity pillar, taper and sculpted candle tools with designed wick location and registration that keeps parting lines where you want them.

Candle manufacturers
Wax melts

Wax melt trays and clamshell tooling

Line-sized trays and clamshell tooling for high-volume wax melt production, with cavity pitch matched to your filling heads.

Soap

Soap bar, loaf and embed tooling

Production tooling for cold-process, melt and pour and pressed soap, including logo relief and embeds.

Soap manufacturers
Bath and body

Bath bomb, melt and steamer tooling

Press and cavity tooling for bath bombs, melts and shower steamers, sized for production rates.

Vessels

Vessel and container moulds

Moulds for concrete, jesmonite and resin candle vessels and diffuser bases, built for repeat production.

Private label

Private-label development

Please contact us before sending sensitive drawings or samples so that any confidentiality arrangements can be agreed.

Planning a programme

How production tooling is sized.

A general guide to the decisions that set output and unit cost.

Typical guide values, confirmed on your quotation. We model output and cost per unit against your line before quoting.

DecisionWhat we need from youWhat it affects
Cavity count and pitchFilling head pitch, conveyor or rack sizeUnits per fill, labour per unit
Silicone grade and hardnessWax or soap formulation, fragrance load, pour temperatureRelease, detail, tool life
Tray and jacket buildHow tools are handled and cooledFlatness, cooling time, handling
Logo and finishing detailArtwork and finish standardShelf appearance, rework
Matched sets and sparesLines, sites and peak-season outputContinuity and lead time on replacements

Send your line layout and target output per shift. We will model cavity count and cost per unit before we quote.

Examples

What silicone and rubber can do in candle, soap and home fragrance manufacturing.

Eight typical jobs for silicone, polyurethane and rubber tooling in this industry. Each one can be a single development tool or a full production set.

From cavity layout to a repeatable release. Labelled conceptual diagram, not a project photograph.
Concept diagram: From cavity layout to a repeatable release. Illustrative geometry, not a photograph or production drawing.
Open labelled diagram
01

Multi-cavity pillar trays

Production trays that pour dozens of pillars at once, sized to your line.

Silicone
02

Soap loaf and bar moulds

Loaf moulds and branded bar trays for cold-process and melt-and-pour lines.

Silicone
03

Wax melt trays

High-cavity trays sized to your packaging and depositor.

Silicone
04

Vessel and sculpted candles

Two-part moulds for sculpted and figurative candles at volume.

Silicone
05

Embossed logos and texture

Logo and pattern detail that lasts across thousands of cycles.

Silicone
06

Seasonal ranges

Tooling sets for seasonal launches, with spares for peak demand.

Silicone
07

Bath and body products

Moulds for bath bombs, shower steamers and solid bath products.

Silicone, PU
08

Replacement and spare sets

Matched replacement moulds from archived masters.

Silicone

Tooling ideas, clearly explained

How we show the tool is right before it reaches your line.

Larger customers ask the same questions: how is it checked, what is it made from, and can you make another one exactly the same? This is how we answer them.

Hands using a digital calliper to check a component.
Measured against your drawingFirst parts from every tool are measured against the drawing before production volumes are released.Hands using a digital calliper to check a component. Representative application photograph.
A circular rubber ring on a plain background.
Traceable materialsA material declaration is supplied with every order, and material data sheets are available on request. Food-contact moulds and their paperwork are supplied through our sister division TCI Culinary. A circular rubber ring on a plain background. Representative stock photograph. Photo: Tam DV
Machined metal components resting on an engineering drawing.
Masters archivedWe keep your masters and drawings on file so repeats are straightforward. Machined metal components resting on an engineering drawing. Representative stock photograph. Photo: EnCata PD
A packed carton ready for dispatch
. Photo: Brandable Box on Unsplash.Shipped with paperworkTools leave with the material declaration for your order, packed for the journey to your line.

Photos: Brandable Box, Jessica Streser, Wilhelm Gunkel, laura adai on Unsplash.

  • Fixed written quotesTooling price, cost per part and payment stages agreed up front. We'll confirm lead times on your quotation.
  • Please contact us before sending sensitive drawings or samples so that any confidentiality arrangements can be agreed.
  • Discuss the technical brief, review stages and project contacts with us when scoping your tooling.
  • Designed in WarwickshireA Warwickshire mould shop, part of TCI Group.
  • Staged approvalsFeasibility, development, validation and production, each on its own PO.
  • Any tooling-specific terms, expected service conditions and remedies must be confirmed in your written quotation and order agreement.

How we work with manufacturers

What comes with every production programme.

Discuss confidentiality

Please contact us before sending sensitive drawings or samples so that any confidentiality arrangements can be agreed.

Project communication

You have a named contact for your programme, from feasibility to repeat supply, and is the person your engineering, quality and procurement teams speak to.

Documentation procurement recognises

Material documentation, inspection requirements, manufacturing responsibilities and any necessary approvals should be specified and confirmed for your project before work is authorised.

Project terms

Any tooling-specific terms, expected service conditions and remedies must be confirmed in your written quotation and order agreement.

Soap bars with pressed flowers setting in a multi-cavity silicone mould
Soap bars with pressed flowers setting in a multi-cavity silicone mould. Representative photograph. Photo: Scott Precious

Programme stages

From a new shape to tooling on every line.

  1. Line and product review

    We review the product, formulation, filling line and target output.

  2. Discuss confidentiality

    Please contact us before sending sensitive drawings or samples so that any confidentiality arrangements can be agreed.

  3. Master and trial tool

    Master and trial tool run on your line to confirm release, cooling and finish.

  4. Matched production sets

    Production tool sets from the approved master for each line and site.

  5. Spares and replacements

    Planned spares and replacement cycles, made from the archived master.

Questions from manufacturers

What production and purchasing teams usually ask.

Can you size tooling to our filling line?

Yes. Send us the line layout, conveyor width, filling head pitch and cooling time, and we will design cavity count, pitch and tray size to suit, so tools drop straight into the line.

Can you make private-label shapes for retailers?

Please contact us before sending sensitive drawings or samples so that any confidentiality arrangements can be agreed.

How long does a production tool last?

Any tooling-specific terms, expected service conditions and remedies must be confirmed in your written quotation and order agreement.

What does a typical production programme cost?

Pricing depends on your design, materials, quantities and tooling scope. Ask us for a quotation against your project brief.

Related industries

Other industries we tool for.

A circuit board on an automated electronics production line
Industrial

Industrial, electronics and wearables

Potting and encapsulation moulds, gaskets and seals, compression-moulded keypads and wearable straps, from validation batches to production supply.

Read more
A row of cast face replicas mounted on a studio wall
Film and TV

Film, TV and special effects

Silicone and rubber moulds for prop houses, creature and prosthetic workshops and art departments: hero props, stunt doubles, prosthetics and set dressing.

Read more
A cast dinosaur skull replica on display in a museum
Attractions

Theme parks, museums and attractions

Large rubber moulds for theming, rockwork and themed panels, museum-grade replicas of artefacts and specimens, and repeat exhibition pieces.

Read more

All industries

Start a programme

Send the product, the line and the output you need.

We will model cavity count and cost per unit, and quote matched tool sets with a spares plan.

Your project, our expertise

Talk through your next mould.

Contact TCI Mouldings with your drawings, samples and production requirements so the technical brief and next steps can be discussed.

  • A real Warwickshire workshopUnit 15, Waterloo Park, Bidford-on-Avon, Alcester B50 4JG.
  • Real people on the phoneCall the team on 01789 224228, Monday to Friday.
  • Agree your project contactsDesign, production and aftercare come from the people you see here.
  • Part of TCI GroupFour specialist divisions under TCI Group, one engineering team. Visit TCI Group.
Two engineers reviewing a three-dimensional model on a computer.
Two engineers reviewing a three-dimensional model on a computer. Representative stock photograph. Photo: Kumpan Electric
Hands measuring a circular component with a digital calliper.
Hands measuring a circular component with a digital calliper. Representative stock photograph. Photo: AFINIS Group ® - AFINIS GASKET® Production
Hands measuring a flexible black sealing ring with digital callipers beside manufacturing equipment.
Representative stock photograph: flexible sealing-component inspection, not TCI premises or a TCI project. Stock photo credit
  • Thomas LaneManaging Director
  • George PrestonDesign & Project Manager
  • Kelly BallingerHead of Partnerships
  • Jim AndertonProduction Manager
  • TheodoreEmployee Welfare
Meet the team