Component trays and nests
Soft-touch silicone trays that locate igniters, sensors and machined components for handling, inspection and transit without marking critical surfaces.
Industries · Aerospace and defence
Silicone, polyurethane and machined tooling for propulsion, airframe, space and defence suppliers. We build to your drawing, agree the inspection plan up front and agree the critical features with your quality team before the tool is built.
What aerospace buyers need

Aerospace parts are rarely difficult because of the shape alone. They are difficult because the tool has to hold a critical feature, survive a cure profile and arrive with records your quality system can accept.
We start with your drawing, your critical-to-function features and your inspection method, then choose the tooling route that will hold them. That might be a platinum-cure silicone tool for a delicate holding tray, a polyurethane tool with a rigid jacket for a repeat cast, or a machined metal mandrel where silicone would move.
Every programme is quoted with a fixed tooling price, cost per part, lead time and the documentation we will supply. If a feature cannot be held reliably by a given route, we say so at quotation stage rather than after the first parts fail inspection.
Typical aerospace work
Six families of tooling cover most of the aerospace work we quote.
Soft-touch silicone trays that locate igniters, sensors and machined components for handling, inspection and transit without marking critical surfaces.
Reusable high-temperature silicone masking for plating, coating, shot-peen and paint processes, moulded to your part so it seats the same way every time.
Paired casting tools with positive locators for test pieces, potting and encapsulation, so every block is cast to the same geometry.
Polyurethane parts in engineering grades for fit checks, rig testing and design reviews, ahead of committing to production tooling.
Silicone intensifiers and caul plates for composite airframe and interior parts, rated to your cure cycle.
Stainless and aluminium mandrels, fixtures and inserts machined through our partner network, with first parts measured against the drawing.
Routes and quantities
A general guide. Geometry, material and the feature you need to hold decide the final route.
Typical figures for planning. We confirm tolerances, cycle life and lead times against your drawing.
| Route | Typical use | Typical quantity | Typical lead time |
|---|---|---|---|
| Platinum silicone tooling | Trays, masking, delicate casting tools | Single tools to matched sets | Lead time depends on the agreed scope, review stages, material availability and current workload. Request a schedule with your quotation. |
| Vacuum casting | Validation and rig-test parts | 10 to a few hundred parts | Lead time depends on the agreed scope, review stages, material availability and current workload. Request a schedule with your quotation. |
| Supported polyurethane tooling | Repeat casts that must hold geometry | Hundreds of cycles | Lead time depends on the agreed scope, review stages, material availability and current workload. Request a schedule with your quotation. |
| Compression moulding | Seals, pads and elastomer parts | Thousands per tool | Lead time depends on the agreed scope, review stages, material availability and current workload. Request a schedule with your quotation. |
| Machined metal tooling | Mandrels, fixtures, inserts | Programme dependent | Lead time depends on the agreed scope, review stages, material availability and current workload. Request a schedule with your quotation. |
If your programme needs a specific material approval or process specification, include it with the enquiry so we can confirm compliance before quoting.
Examples
Eight typical jobs for silicone, polyurethane and rubber tooling in this industry. Each one can be a single development tool or a full production set.
Silicone boots and plugs that mask roots, bores and threads during plasma spray, painting and plating.
High-temperature siliconeSoft-faced cradles that hold curved composite and machined parts without marking them during CMM and NDT.
Polyurethane, siliconeDucts, housings and brackets cast in engineering polyurethanes for fit checks before metal or injection tooling.
Silicone tool, PU partsSilicone bladders and intensifiers that consolidate carbon parts in corners and closed sections.
SiliconeLow-volume moulded seals, cable grommets and dust boots for ground equipment and cabin fit-out.
Silicone, EPDMMoulds that pot connectors and sensors in resin or silicone for vibration and moisture protection.
Silicone toolLightweight replicas of components for maintenance training, fit trials and exhibition models.
PU, resinMoulded pads and mounts that isolate test rigs, electronics trays and ground equipment.
Silicone, PU elastomerTooling ideas, clearly explained
Larger customers ask the same questions: how is it checked, what is it made from, and can you make another one exactly the same? This is how we answer them.




Photos: Brandable Box, Jessica Streser, Wilhelm Gunkel, laura adai on Unsplash.
How we work with engineering and quality teams
Please contact us before sending sensitive drawings or samples so that any confidentiality arrangements can be agreed.
You have a named contact for your programme, from feasibility to repeat supply, and is the person your engineering, quality and procurement teams speak to.
Material documentation, inspection requirements, manufacturing responsibilities and any necessary approvals should be specified and confirmed for your project before work is authorised.
Any tooling-specific terms, expected service conditions and remedies must be confirmed in your written quotation and order agreement.

Programme stages
We review the drawing, critical features and inspection method, and tell you which route will hold them and which will not.
Please contact us before sending sensitive drawings or samples so that any confidentiality arrangements can be agreed.
A first tool and a short validation run, with first parts measured against the drawing.
Please include your required inspection, traceability and supplier-approval documents in the enquiry so their scope can be confirmed.
Matched production tools, a spares plan and archived masters so a replacement tool matches the last.
Questions from aerospace buyers
No. We do not hold AS9100 certification. Tell us which documents your project requires, and we will confirm on your quotation what we can supply. This website does not establish certification or finished-product suitability.
We agree the critical features with you before the tool is built, then measure first parts from the tool against the drawing before any production quantity is released. Every order comes with a material declaration.
Standard platinum-cure grades are typically rated to around 200 °C continuous, and selected high-temperature grades go higher for short cycles. We confirm the exact grade, rating and data sheet against your cure or process profile before we quote.
Tell us at enquiry stage. We will agree how data is shared, stored and returned before you send anything, and we keep sensitive programmes to a named team.
Pricing depends on your design, materials, quantities and tooling scope. Ask us for a quotation against your project brief.
Related industries

Development and bridge tooling, skin-contact silicone parts, anatomical models and LSR routes for device manufacturers and their design partners.
Read more
Silicone bladders and intensifiers, caul plates, master plugs and layup tooling for motorsport, automotive, marine, UAV and sporting goods.
Read more
Silicone bladders, intensifiers and reusable vacuum bags for carbon parts, plus wind tunnel parts and rubber seals, for race teams and their suppliers.
Read moreStart a programme
We will come back with the route, the documentation we can provide and a fixed programme price.
Your project, our expertise
Contact TCI Mouldings with your drawings, samples and production requirements so the technical brief and next steps can be discussed.



Thomas LaneManaging Director
George PrestonDesign & Project Manager
Kelly BallingerHead of Partnerships
Jim AndertonProduction Manager
TheodoreEmployee Welfare