Bidford-on-Avon, Warwickshire. Mon to Fri.01789 224228

Industries · Carbon fibre and composites

Carbon fibre and composite tooling, from plug to bladder.

Silicone bladders and intensifiers, caul plates, master patterns and layup tooling for motorsport, automotive, marine, UAV, sporting goods and prosthetics manufacturers. Built around your laminate, resin system and cure cycle.

CustomProject-led tooling
MaterialsSelected for the application
ScopeAgreed against your brief
ContactWarwickshire, UK

What composite manufacturers need

Tooling that survives the cure and keeps the laminate honest.

Carbon fibre laminate showing the weave
Carbon fibre laminate showing the weave. Representative photograph. Photo: Rick Rothenberg

In composites, the tool decides the part. A bladder that relaxes after ten cures or a caul that does not follow the surface shows up as voids, wrinkles and rework.

We design composite tooling around your laminate schedule, resin system and cure profile. That means choosing the silicone grade for the temperature and pressure, controlling wall thickness so pressure is applied evenly, and building masters to the surface finish your part needs.

Material documentation, inspection requirements, manufacturing responsibilities and any necessary approvals should be specified and confirmed for your project before work is authorised.

Our master pattern service

Typical composite work

What we make for composite manufacturers.

Six families of tooling cover most composite enquiries.

Pressure

Silicone bladders and intensifiers

Internal pressure bladders and local intensifiers that consolidate corners, returns and tubular sections that a vacuum bag cannot reach.

Surface

Caul plates and pressure pads

Moulded silicone cauls that follow the part surface and spread pressure evenly for better consolidation and finish.

Masters

Master plugs and patterns

Machined and hand-finished plugs in tooling board or epoxy, prepared for tool-taking at the surface finish your part needs.

Layup tools

Layup moulds and soft tooling

Silicone and polyurethane layup tools for short runs, development parts and complex shapes that are hard to release from rigid tools.

Trim and drill

Fixtures and jigs

Trim, drill and bonding fixtures with soft-contact silicone faces that hold the part without marking it.

Reverse engineering

Scan-to-tool

Scan an existing part, rebuild clean CAD and produce a new master or tool, ready for repeat production.

Where our composite tooling goes

Industries and the tooling they ask for most.

A snapshot of the sectors we tool for and the work each one typically needs.

Typical guide values, confirmed on your quotation. Every programme is quoted against its own laminate, cure cycle and volume.

SectorTypical toolingTypical cureWhy silicone helps
Motorsport and automotiveBladders, cauls, intensifiersAutoclave or ovenConsolidates complex returns and ducts
MarinePlugs, soft layup tools, caulsRoom temperature or ovenReleases complex mouldings without damage
UAV and dronesBladders, layup tools, fixturesOven or autoclaveLightweight hollow sections in one cure
Sporting goodsBladders for frames and tubesOven or pressEven internal pressure on tubular parts
Prosthetics and orthoticsSoft tools, cauls, mastersOvenFollows patient-specific geometry

Tell us the peak temperature, pressure and dwell. We confirm the grade and expected cure life with its data sheet before quoting.

Examples

What silicone and rubber can do in carbon fibre and composites.

Eight typical jobs for silicone, polyurethane and rubber tooling in this industry. Each one can be a single development tool or a full production set.

Composite tooling: surface, support and release. Labelled conceptual diagram, not a project photograph.
Concept diagram: Composite tooling: surface, support and release. Illustrative geometry, not a photograph or production drawing.
Open labelled diagram
01

Silicone bladders

Inflatable bladders that press carbon from the inside of tubes, frames and closed sections.

Silicone
02

Intensifiers

Shaped silicone pads that put pressure into tight corners, radii and joggles where bags bridge.

Silicone
03

Reusable vacuum bags

Moulded silicone bags that replace disposable film on repeat parts, saving time and consumables.

Silicone
04

Caul plates

Flexible or semi-rigid cauls that give a controlled surface on the bag side of a laminate.

Silicone, PU
05

Master plugs

Machined or printed plugs finished to class-A for taking GRP and carbon moulds.

Tooling board, epoxy
06

Edge and trim fixtures

Soft-faced fixtures that hold parts for trimming, drilling and bonding.

Polyurethane
07

Mandrels and cores

Washout or extractable silicone cores for hollow and complex composite parts.

Silicone
08

Bonding jigs

Rubber-faced jigs that hold assemblies square while adhesive cures.

PU, silicone

Tooling ideas, clearly explained

How we show the tool is right before it reaches your line.

Larger customers ask the same questions: how is it checked, what is it made from, and can you make another one exactly the same? This is how we answer them.

Hands using a digital calliper to check a component.
Measured against your drawingFirst parts from every tool are measured against the drawing before production volumes are released.Hands using a digital calliper to check a component. Representative application photograph.
A circular rubber ring on a plain background.
Traceable materialsA material declaration is supplied with every order, and material data sheets are available on request. Food-contact moulds and their paperwork are supplied through our sister division TCI Culinary. A circular rubber ring on a plain background. Representative stock photograph. Photo: Tam DV
Machined metal components resting on an engineering drawing.
Masters archivedWe keep your masters and drawings on file so repeats are straightforward. Machined metal components resting on an engineering drawing. Representative stock photograph. Photo: EnCata PD
A packed carton ready for dispatch
. Photo: Brandable Box on Unsplash.Shipped with paperworkTools leave with the material declaration for your order, packed for the journey to your line.

Photos: Brandable Box, Jessica Streser, Wilhelm Gunkel, laura adai on Unsplash.

  • Fixed written quotesTooling price, cost per part and payment stages agreed up front. We'll confirm lead times on your quotation.
  • Please contact us before sending sensitive drawings or samples so that any confidentiality arrangements can be agreed.
  • Discuss the technical brief, review stages and project contacts with us when scoping your tooling.
  • Designed in WarwickshireA Warwickshire mould shop, part of TCI Group.
  • Staged approvalsFeasibility, development, validation and production, each on its own PO.
  • Any tooling-specific terms, expected service conditions and remedies must be confirmed in your written quotation and order agreement.

How we work with composite teams

What comes with every composite programme.

Discuss confidentiality

Please contact us before sending sensitive drawings or samples so that any confidentiality arrangements can be agreed.

Project communication

You have a named contact for your programme, from feasibility to repeat supply, and is the person your engineering, quality and procurement teams speak to.

Documentation procurement recognises

Material documentation, inspection requirements, manufacturing responsibilities and any necessary approvals should be specified and confirmed for your project before work is authorised.

Project terms

Any tooling-specific terms, expected service conditions and remedies must be confirmed in your written quotation and order agreement.

A carbon fibre interior panel
A carbon fibre interior panel. Representative photograph. Photo: 王 大洪

Programme stages

From laminate schedule to repeat tooling.

  1. Brief and cure review

    We review the part, laminate schedule, resin system and cure cycle, and propose the tooling approach.

  2. Discuss confidentiality

    Please contact us before sending sensitive drawings or samples so that any confidentiality arrangements can be agreed.

  3. Master and first tool

    Machined master, first silicone or soft tool, and a trial cure with your laminate.

  4. Refinement

    Wall thickness, fit and release are tuned from the trial before tools are duplicated.

  5. Production sets and spares

    Matched tool sets, planned replacements and archived masters for repeat supply.

Questions from composite manufacturers

What engineers and production managers usually ask.

Can your silicone bladders survive an autoclave cure?

Yes, when the grade is chosen for the cycle. Tell us the peak temperature, pressure, dwell and resin system, and we will propose a grade with its data sheet. For high-temperature or high-cycle work we will advise how many cures to expect before a bladder should be replaced.

Do you make the carbon fibre parts as well?

Our focus is the tooling: plugs, masters, layup tools, cauls and bladders. Where you need finished laminates, we can manage that through vetted composite partners as part of the same programme, and we will tell you which is which.

What do you machine plugs and masters from?

Usually tooling board or epoxy block for patterns and plugs, and aluminium where a tool needs to be durable and thermally stable. The right choice depends on cure temperature, cycle count and the surface finish you need.

Can you reverse engineer an existing composite part?

Material documentation, inspection requirements, manufacturing responsibilities and any necessary approvals should be specified and confirmed for your project before work is authorised.

What does a typical composites programme cost?

Pricing depends on your design, materials, quantities and tooling scope. Ask us for a quotation against your project brief.

Related industries

Other industries we tool for.

Race engineers working on a single-seater in the garage
Motorsport

Motorsport and high-performance automotive

Silicone bladders, intensifiers and reusable vacuum bags for carbon parts, plus wind tunnel parts and rubber seals, for race teams and their suppliers.

Read more
A boat hull on stands in a boatyard
Marine

Marine and boatbuilding

Reusable silicone vacuum bags, non-slip deck texture tooling, fitting moulds and rubber seals for yacht, RIB, workboat and marine component builders.

Read more
A precast concrete facade cast from repeated moulded units
Construction

Construction and architectural

Supported polyurethane and silicone moulds for precast, GRC, cast stone, formliners and heritage reproduction, with rigid jackets that hold shape.

Read more

All industries

Start a programme

Send the part, the laminate and the cure cycle.

We will propose the tooling, the expected tool life and a fixed programme price.

Your project, our expertise

Talk through your next mould.

Contact TCI Mouldings with your drawings, samples and production requirements so the technical brief and next steps can be discussed.

  • A real Warwickshire workshopUnit 15, Waterloo Park, Bidford-on-Avon, Alcester B50 4JG.
  • Real people on the phoneCall the team on 01789 224228, Monday to Friday.
  • Agree your project contactsDesign, production and aftercare come from the people you see here.
  • Part of TCI GroupFour specialist divisions under TCI Group, one engineering team. Visit TCI Group.
Two engineers reviewing a three-dimensional model on a computer.
Two engineers reviewing a three-dimensional model on a computer. Representative stock photograph. Photo: Kumpan Electric
Hands measuring a circular component with a digital calliper.
Hands measuring a circular component with a digital calliper. Representative stock photograph. Photo: AFINIS Group ® - AFINIS GASKET® Production
Hands measuring a flexible black sealing ring with digital callipers beside manufacturing equipment.
Representative stock photograph: flexible sealing-component inspection, not TCI premises or a TCI project. Stock photo credit
  • Thomas LaneManaging Director
  • George PrestonDesign & Project Manager
  • Kelly BallingerHead of Partnerships
  • Jim AndertonProduction Manager
  • TheodoreEmployee Welfare
Meet the team