Lipstick and balm bullets
Multi-cavity silicone moulds for bullets with domes, bevels and moulded logos.
Industries · Cosmetics and beauty manufacturing
Multi-cavity silicone moulds for lipstick bullets, balms, solid perfumes, shampoo and conditioner bars and solid skincare, with embossed branding, plus tooling for applicators, sponges and packaging inserts. For prestige brands, contract manufacturers and private-label producers.
What beauty manufacturers need

In prestige cosmetics the product is the packaging. A bullet with a flow line or a blurred logo is a reject, and rejects at volume are expensive.
We build multi-cavity silicone moulds for hot-pour and filled products, sized to your line, trays and cooling tunnels, with logos and textures that stay crisp through repeated cycles. Grades are chosen for the formulation and temperature, with supplier data for cosmetic use.
Moulds are supplied as matched sets with spares, and masters are archived so the next production order matches the last.
Typical cosmetics work
Six families of tooling cover most enquiries in this industry.
Multi-cavity silicone moulds for bullets with domes, bevels and moulded logos.
Production moulds for solid bars with branded relief, sized to the line.
Moulds for solid perfume compacts and decorative fragrance items.
High-volume tooling for bath bombs, melts and moulded body care.
Tooling for silicone applicators, brushes and sponges.
Moulded inserts and display pieces for gift sets and counters.
Parts and tooling
A general guide. Geometry, material and volume decide the final tool.
Typical guide values, confirmed on your quotation. We confirm grade, tool life and lead time against your part and process.
| Product | Typical mould | Typical run | Why it matters |
|---|---|---|---|
| Lipstick bullet | Multi-cavity platinum silicone | Production volumes | Glossy finish and crisp logo |
| Balm or solid perfume | Multi-cavity silicone | Production volumes | Clean release, no flow lines |
| Shampoo and skincare bar | Line-sized silicone trays | Production volumes | Branded relief that lasts |
| Applicator | Compression or LSR tooling | Thousands | Consistent feel and finish |
| Gift insert | Cast silicone tooling | Hundreds to thousands | Precise fit for product |
Send the drawing, the material and the quantities with your enquiry so we can confirm the route before quoting.
Examples
Eight typical jobs for silicone, polyurethane and rubber tooling in this industry. Each one can be a single development tool or a full production set.
Multi-cavity moulds for glossy, branded lipstick bullets.
Platinum siliconeMoulds for balms, solid perfumes and sticks.
SiliconeBranded bar trays for solid beauty products.
SiliconeMasters and embossing tools for powders and compacts.
Silicone, PUSoft silicone applicators and brushes.
SiliconeBath bombs, melts and spa products at volume.
Silicone, PUSoft inserts and trays for gift sets.
Silicone, PUShort runs of new formats for buyers and press.
SiliconeTooling ideas, clearly explained
Larger customers ask the same questions: how is it checked, what is it made from, and can you make another one exactly the same? This is how we answer them.




Photos: Brandable Box, Jessica Streser, Wilhelm Gunkel, laura adai on Unsplash.
How we work
Please contact us before sending sensitive drawings or samples so that any confidentiality arrangements can be agreed.
You have a named contact for your programme, from feasibility to repeat supply, and is the person your engineering, quality and procurement teams speak to.
Material documentation, inspection requirements, manufacturing responsibilities and any necessary approvals should be specified and confirmed for your project before work is authorised.
Any tooling-specific terms, expected service conditions and remedies must be confirmed in your written quotation and order agreement.

Programme stages
We review the part, the material, the quantities and the deadline, and propose the tooling.
Please contact us before sending sensitive drawings or samples so that any confidentiality arrangements can be agreed.
Master made from your CAD, scan or original, and the first tool trialled.
Fit, finish and release tuned from the trial before tools are duplicated.
Matched sets, planned replacements and archived masters.
Common questions
Yes. We put brand marks, textures and fine text into the cavity, tested for release with your formulation.
Yes. Send tray sizes, pitch and cooling details, and we will size the moulds to your line.
We select grades with supplier data for cosmetic and skin contact applications and supply that data. Product safety sign-off remains with the brand.
Pricing depends on your design, materials, quantities and tooling scope. Ask us for a quotation against your project brief.
Related industries

Food-grade production tooling for chocolate, confectionery, bakery, frozen dessert and ready-meal manufacturers: line-sized moulds, depositing trays and branded shapes.
Read more
Large formliners, supported rubber moulds and rubber inserts for big precast and in-situ concrete: facade panels, bridge parapets, retaining walls, stairs and tunnel portals.
Read more
Supported rubber moulds for large concrete street furniture, planters, water features, paving, memorials and monuments in concrete, GRC and cast stone.
Read moreStart a programme
We will propose the cavity count, the grade and a fixed programme price.
Your project, our expertise
Contact TCI Mouldings with your drawings, samples and production requirements so the technical brief and next steps can be discussed.



Thomas LaneManaging Director
George PrestonDesign & Project Manager
Kelly BallingerHead of Partnerships
Jim AndertonProduction Manager
TheodoreEmployee Welfare