Bidford-on-Avon, Warwickshire. Mon to Fri.01789 224228

Industries · Rail, transport and specialist vehicles

Moulds for rail, transport and specialist vehicles.

Silicone and rubber tooling for seals, gaskets, grommets and bump stops, interior trim and armrests, composite cab and body panels, and low-volume parts that do not justify steel tools. For rolling stock builders and refurbishers, bus and coach makers, and defence and specialist vehicle manufacturers.

CustomProject-led tooling
MaterialsSelected for the application
ScopeAgreed against your brief
ContactWarwickshire, UK

What vehicle builders need

Parts for fleets built in hundreds, and spares for fleets that last decades.

A high-speed train arriving at a station
A high-speed train arriving at a station. Representative photograph. Photo: Markus Winkler

Rail and specialist vehicles are built in volumes too small for steel tooling, and then kept in service for thirty years. Original parts go obsolete long before the vehicle does.

We make silicone and polyurethane tooling for seals, trim and composite parts at fleet volumes, and reverse-engineer obsolete parts from samples or scans so refurbishment programmes are not held up by a missing grommet or armrest.

Material documentation, inspection requirements, manufacturing responsibilities and any necessary approvals should be specified and confirmed for your project before work is authorised.

Our moulding processes

Typical rail work

What we make for vehicle builders.

Six families of tooling cover most enquiries in this industry.

Sealing

Door, window and panel seals

Moulded corners, end caps and special profiles that extruded seals cannot do alone.

Interiors

Armrests, trim and grab handles

Cast polyurethane and integral-skin parts for seating and interior refurbishment.

Body

Composite cab and body panels

Silicone cauls, plugs and soft tooling for GRP and carbon cab fronts and panels.

Refurbishment

Obsolete part replacement

Reverse-engineered tooling from samples or scans when the original supplier has gone.

Defence

Specialist and defence vehicles

Low-volume rubber and composite parts for specialist and protected vehicles.

Anti-vibration

Bump stops, mounts and buffers

Moulds for elastomer buffers and mounts at fleet quantities.

Parts and tooling

Choosing the tooling for the part.

A general guide. Geometry, material and volume decide the final tool.

Typical guide values, confirmed on your quotation. We confirm grade, tool life and lead time against your part and process.

PartTypical toolingTypical runWhy it matters
Moulded seal cornersCompression or cast toolingHundreds to thousandsJoins extruded profiles cleanly
Armrests and trimPolyurethane toolingHundreds per fleetMatches existing interiors
Cab and body panelsComposite plugs and caulsTens to hundredsLarge parts without steel tools
Obsolete partsTooling from sample or scanAs neededKeeps refurbishment on schedule
Buffers and mountsMulti-cavity elastomer toolingThousandsConsistent hardness and fit

Send the drawing, the material and the quantities with your enquiry so we can confirm the route before quoting.

Examples

What silicone and rubber can do in rail, transport and specialist vehicles.

Eight typical jobs for silicone, polyurethane and rubber tooling in this industry. Each one can be a single development tool or a full production set.

Transport profiles: form, tooling and fit. Labelled conceptual diagram, not a project photograph.
Concept diagram: Transport profiles: form, tooling and fit. Illustrative geometry, not a photograph or production drawing.
Open labelled diagram
01

Door and window seals

Custom seals for doors, windows and gangways.

EPDM, silicone
02

Buffers and bump stops

Rubber and PU buffers for vehicles and depots.

PU elastomer
03

Anti-vibration mounts

Mounts for equipment, seats and panels.

Rubber, PU
04

Interior panels and trim

Cast seat ends, panels and covers for refurbishment.

Silicone tool, PU
05

Cable grommets

Grommets and boots for under-floor and cab wiring.

Silicone, rubber
06

Heritage parts

Replacement rubber and trim for heritage fleets.

Silicone, PU
07

Specialist vehicle parts

Low-volume parts for buses, coaches and emergency vehicles.

PU, silicone
08

Fire-performance parts

Parts in grades selected for fire performance, to your specification.

Specified silicone grades

Tooling ideas, clearly explained

How we show the tool is right before it reaches your line.

Larger customers ask the same questions: how is it checked, what is it made from, and can you make another one exactly the same? This is how we answer them.

Hands using a digital calliper to check a component.
Measured against your drawingFirst parts from every tool are measured against the drawing before production volumes are released.Hands using a digital calliper to check a component. Representative application photograph.
A circular rubber ring on a plain background.
Traceable materialsA material declaration is supplied with every order, and material data sheets are available on request. Food-contact moulds and their paperwork are supplied through our sister division TCI Culinary. A circular rubber ring on a plain background. Representative stock photograph. Photo: Tam DV
Machined metal components resting on an engineering drawing.
Masters archivedWe keep your masters and drawings on file so repeats are straightforward. Machined metal components resting on an engineering drawing. Representative stock photograph. Photo: EnCata PD
A packed carton ready for dispatch
. Photo: Brandable Box on Unsplash.Shipped with paperworkTools leave with the material declaration for your order, packed for the journey to your line.

Photos: Brandable Box, Jessica Streser, Wilhelm Gunkel, laura adai on Unsplash.

  • Fixed written quotesTooling price, cost per part and payment stages agreed up front. We'll confirm lead times on your quotation.
  • Please contact us before sending sensitive drawings or samples so that any confidentiality arrangements can be agreed.
  • Discuss the technical brief, review stages and project contacts with us when scoping your tooling.
  • Designed in WarwickshireA Warwickshire mould shop, part of TCI Group.
  • Staged approvalsFeasibility, development, validation and production, each on its own PO.
  • Any tooling-specific terms, expected service conditions and remedies must be confirmed in your written quotation and order agreement.

How we work

What comes with every programme.

Discuss confidentiality

Please contact us before sending sensitive drawings or samples so that any confidentiality arrangements can be agreed.

Project communication

You have a named contact for your programme, from feasibility to repeat supply, and is the person your engineering, quality and procurement teams speak to.

Documentation procurement recognises

Material documentation, inspection requirements, manufacturing responsibilities and any necessary approvals should be specified and confirmed for your project before work is authorised.

Project terms

Any tooling-specific terms, expected service conditions and remedies must be confirmed in your written quotation and order agreement.

A rail carriage interior with rows of upholstered seats
A rail carriage interior with rows of upholstered seats. Representative photograph. Photo: Uriel Soberanes

Programme stages

From brief to production tooling.

  1. Brief and review

    We review the part, the material, the quantities and the deadline, and propose the tooling.

  2. Discuss confidentiality

    Please contact us before sending sensitive drawings or samples so that any confidentiality arrangements can be agreed.

  3. Master and first tool

    Master made from your CAD, scan or original, and the first tool trialled.

  4. Refinement

    Fit, finish and release tuned from the trial before tools are duplicated.

  5. Production sets and spares

    Matched sets, planned replacements and archived masters.

Common questions

What buyers in this industry usually ask.

Can you meet rail fire and smoke requirements?

Material selection is made against the standard you specify, using materials with the supplier’s test evidence. We supply that data with the programme and do not claim compliance we cannot evidence.

Can you copy a part we no longer have drawings for?

Yes. Send a sample and we will scan or measure it, produce a master and confirm fit before tooling up.

Do you supply finished parts?

Yes, through validation batches and contract production, or via vetted partners for larger volumes. We agree which route suits the programme.

What does a typical programme cost?

Pricing depends on your design, materials, quantities and tooling scope. Ask us for a quotation against your project brief.

Related industries

Other industries we tool for.

Pneumatic grippers and actuators on an automated assembly cell
Robotics

Robotics and automation

Moulds for soft robotic grippers, vacuum cups, finger pads, bellows and protective covers for robot makers, integrators and automated production lines.

Read more
A clinician fitting a prosthetic hand
Prosthetics

Prosthetics, orthotics and clinical simulation

Moulds for prosthetic covers and liners, orthotic pads, facial and body prostheses, and lifelike clinical training and simulation models.

Read more
A row of moulded lipsticks in six shades
Cosmetics

Cosmetics and beauty manufacturing

Production moulds for lipstick, balm, solid perfume, shampoo bars and solid skincare, plus applicators and packaging inserts for prestige and contract cosmetics manufacturers.

Read more

All industries

Start a programme

Send the drawing or a sample, and the fleet size.

We will propose the tooling, the material and a fixed programme price.

Your project, our expertise

Talk through your next mould.

Contact TCI Mouldings with your drawings, samples and production requirements so the technical brief and next steps can be discussed.

  • A real Warwickshire workshopUnit 15, Waterloo Park, Bidford-on-Avon, Alcester B50 4JG.
  • Real people on the phoneCall the team on 01789 224228, Monday to Friday.
  • Agree your project contactsDesign, production and aftercare come from the people you see here.
  • Part of TCI GroupFour specialist divisions under TCI Group, one engineering team. Visit TCI Group.
Two engineers reviewing a three-dimensional model on a computer.
Two engineers reviewing a three-dimensional model on a computer. Representative stock photograph. Photo: Kumpan Electric
Hands measuring a circular component with a digital calliper.
Hands measuring a circular component with a digital calliper. Representative stock photograph. Photo: AFINIS Group ® - AFINIS GASKET® Production
Hands measuring a flexible black sealing ring with digital callipers beside manufacturing equipment.
Representative stock photograph: flexible sealing-component inspection, not TCI premises or a TCI project. Stock photo credit
  • Thomas LaneManaging Director
  • George PrestonDesign & Project Manager
  • Kelly BallingerHead of Partnerships
  • Jim AndertonProduction Manager
  • TheodoreEmployee Welfare
Meet the team