Full-height facade and cladding panels
Textured and relief formliners for storey-height precast cladding, sized to your tables and jointed so seams disappear.
Industries · Large-scale precast and civil concrete
Full-height textured formliners, supported polyurethane and silicone moulds, and rubber inserts that sit inside steel and timber formwork. For precast manufacturers, civil and main contractors, formwork specialists and the architects and engineers who specify the finish.
What large-scale concrete needs

On big elements the formwork is usually steel or timber. What makes the element architectural is the face: the texture, the relief, the crisp arris and the drip groove. That face is where silicone and polyurethane earn their place.
We build large-format formliners and supported moulds that fix into your steel or timber formwork, plus rubber inserts, recess formers and edge profiles for the details a steel mould cannot release. Faces are cast from a master to your drawing, scan or sample panel, so panel 200 matches panel one.
Liners are sized and jointed to your casting beds and handling equipment, with a planned number of pours and replacement faces built into longer programmes. For the largest formliner programmes we work alongside our sister company TCI Construction.
Typical large precast work
Six families of tooling cover most enquiries in this industry.
Textured and relief formliners for storey-height precast cladding, sized to your tables and jointed so seams disappear.
Repeat-use liners for parapet units, abutments and wing walls, with the texture, drip detail and arris specified by the designer.
Large textured liners for in-situ and precast retaining walls and acoustic barriers, from stone and timber textures to bespoke relief.
Rubber nosings, anti-slip textures and recess formers for precast stair flights, terraces and stadium seating units.
Relief panels and textured liners for portals, shafts and station walls, plus rubber recess and groove formers.
Split, jacketed rubber moulds for big fluted columns, capitals and one-off feature elements that need to release undercuts.
Parts and tooling
A general guide. Geometry, material and volume decide the final tool.
Typical guide values, confirmed on your quotation. We confirm grade, tool life and lead time against your part and process.
| Element | Typical tooling | Typical scale | Why it matters |
|---|---|---|---|
| Facade panel | PU formliner in steel table mould | Storey-height panels | Texture repeats across a whole building |
| Bridge parapet | Repeat-use PU liner and edge formers | Long runs of identical units | Drip and arris details survive every pour |
| Retaining wall | Large in-situ formliner | Long, tall pours on site | Joints between liners hidden in the texture |
| Stair flight | Rubber nosing and recess inserts | Precast flights and landings | Anti-slip and nosing detail in the casting |
| Feature column | Split, jacketed silicone or PU | Several metres tall | Undercuts release without damaging the face |
Send the drawing, the material and the quantities with your enquiry so we can confirm the route before quoting.
Examples
Eight typical jobs for silicone, polyurethane and rubber tooling in this industry. Each one can be a single development tool or a full production set.
Textured and relief liners fixed into steel table moulds for full-height precast cladding.
PU formlinerRepeat-use liners and edge formers for long runs of identical parapet units.
PU formlinerLarge in-situ liners for tall pours, with joints hidden in the texture.
PU formlinerRubber nosings, anti-slip textures and recess formers for precast stairs and stadium seating.
PU, rubber insertsRelief panels and textured liners for portals, shafts and station walls.
PU formlinerSplit, jacketed moulds for fluted columns and capitals several metres tall.
Silicone, supported PURubber formers for drips, grooves, fixings and cast-in channels in steel moulds.
Silicone, PUMoulds for architect’s sample panels and visual mock-ups before production.
Silicone, PUTooling ideas, clearly explained
Larger customers ask the same questions: how is it checked, what is it made from, and can you make another one exactly the same? This is how we answer them.




Photos: Brandable Box, Jessica Streser, Wilhelm Gunkel, laura adai on Unsplash.
How we work
Please contact us before sending sensitive drawings or samples so that any confidentiality arrangements can be agreed.
You have a named contact for your programme, from feasibility to repeat supply, and is the person your engineering, quality and procurement teams speak to.
Material documentation, inspection requirements, manufacturing responsibilities and any necessary approvals should be specified and confirmed for your project before work is authorised.
Any tooling-specific terms, expected service conditions and remedies must be confirmed in your written quotation and order agreement.

Programme stages
We review the part, the material, the quantities and the deadline, and propose the tooling.
Please contact us before sending sensitive drawings or samples so that any confidentiality arrangements can be agreed.
Master made from your CAD, scan or original, and the first tool trialled.
Fit, finish and release tuned from the trial before tools are duplicated.
Matched sets, planned replacements and archived masters.
Common questions
Yes, when they are designed for it. On large elements the rubber is a face, not the structure. It is fixed into steel or timber formwork, or backed by a rigid jacket, so the weight of the concrete is carried by the frame and the rubber only has to carry the detail.
Our focus is the rubber: liners, faces, inserts and the masters behind them. We work with your formwork supplier or your own yard, and where a full mould is needed we can manage the frame through a partner within the same programme and tell you which is which.
It depends on the concrete, release agent, vibration, demould method and how the liner is handled and stored. We quote an expected number of uses with every liner and plan replacement faces into longer programmes.
Yes. We can take a mould from a sample panel, an existing wall or a natural surface such as stone or timber, or build the texture digitally from the architect’s design.
Pricing depends on your design, materials, quantities and tooling scope. Ask us for a quotation against your project brief.
Related industries

Supported rubber moulds for large concrete street furniture, planters, water features, paving, memorials and monuments in concrete, GRC and cast stone.
Read more
Silicone and polyurethane tooling, masking and holding fixtures, and vacuum-cast validation parts, built to drawing with documented inspection.
Read more
Development and bridge tooling, skin-contact silicone parts, anatomical models and LSR routes for device manufacturers and their design partners.
Read moreStart a programme
We will propose the liner and mould strategy, the expected uses and a fixed programme price.
Your project, our expertise
Contact TCI Mouldings with your drawings, samples and production requirements so the technical brief and next steps can be discussed.



Thomas LaneManaging Director
George PrestonDesign & Project Manager
Kelly BallingerHead of Partnerships
Jim AndertonProduction Manager
TheodoreEmployee Welfare