Bidford-on-Avon, Warwickshire. Mon to Fri.01789 224228

Industries · Restaurants, hotels and fine dining

High-end custom moulds for restaurants and luxury hotels.

Signature dessert forms, branded chocolate and amenities, and multi-cavity banqueting tools in food-contact silicone, designed with your pastry team and supplied as matched sets across your sites.

Food-contact moulds are made through our sister division TCI Culinary

CustomProject-led tooling
MaterialsSelected for the application
ScopeAgreed against your brief
ContactWarwickshire, UK

What premium kitchens need

A signature that looks the same on every plate, at every site.

Rows of shaped chocolates on a work surface.
Rows of shaped chocolates on a work surface. Representative stock photograph. Photo: Y S

A signature dessert or branded chocolate is part of how a restaurant or hotel is remembered. The mould has to reproduce it exactly, release cleanly at speed and survive a busy pastry section.

We work with executive and pastry chefs to turn a sketch, plated reference or sculpted master into a production mould. Geometry is refined for release and detail in chocolate, mousse, ice and sugar, and trays are sized to your blast chillers, racks and gastronorm sizes.

For groups with several kitchens, we supply matched sets from one archived master, so the dessert in one city matches the dessert in another. Our sister company TCI Culinary supports longer food-contact production runs.

Chocolate bar and logo mould

Typical hospitality work

What we make for restaurants and hotels.

Six families of tooling cover most hospitality enquiries.

Signature

Signature dessert forms

Bespoke forms for entremets, mousses and plated desserts that define a menu, refined for clean release and crisp edges.

Branded

Branded chocolate and amenities

Crested chocolate, turndown amenities and petits fours with logos and lettering checked for legibility in chocolate.

Banqueting

Multi-cavity banqueting trays

Trays sized to blast chillers, racks and gastronorm sizes, so a small brigade can produce banqueting volumes consistently.

Bar

Ice and cocktail moulds

Branded and sculpted ice, garnish and cocktail moulds for hotel bars and cocktail programmes.

Retail

Retail and gifting ranges

Moulds for patisserie, chocolate and gifting ranges sold in hotel boutiques and restaurant shops.

Multi-site

Matched sets for groups

Matched mould sets from one archived master, with replacements and new-site sets made to the same specification.

Examples

What silicone and rubber can do in restaurants, hotels and fine dining.

Eight typical jobs for silicone, polyurethane and rubber tooling in this industry. Each one can be a single development tool or a full production set.

Kitchen moulds: shape, layout and release. Labelled conceptual diagram, not a project photograph.
Concept diagram: Kitchen moulds: shape, layout and release. Illustrative geometry, not a photograph or production drawing.
Open labelled diagram
01

Signature dessert moulds

Custom shapes that make a dish recognisable across every site in a group.

Food-contact platinum silicone
02

Branded chocolate

Logo bars, tablets and bonbons for hotels, guests and retail.

Food-contact silicone
03

Banqueting trays

Multi-cavity trays sized to gastronorm for consistent large events.

Food-contact silicone
04

Ice and frozen desserts

Moulds for sculpted ice, sorbets and frozen centrepieces.

Food-contact silicone
05

Sugar and isomalt work

Heat-resistant moulds for sugar showpieces and decorations.

High-temperature silicone
06

Petit fours and mignardises

Fine-detail multi-cavity moulds for small pieces.

Food-contact silicone
07

Tuile and decoration mats

Thin silicone mats for tuiles, lace and decorative elements.

Food-contact silicone
08

Butter and canapé moulds

Branded butter, canapé bases and amuse-bouche shapes.

Food-contact silicone

All food-contact moulds on this page are made through our sister division TCI Culinary.

Tooling ideas, clearly explained

How we show the tool is right before it reaches your line.

Larger customers ask the same questions: how is it checked, what is it made from, and can you make another one exactly the same? This is how we answer them.

Hands using a digital calliper to check a component.
Measured against your drawingFirst parts from every tool are measured against the drawing before production volumes are released.Hands using a digital calliper to check a component. Representative application photograph.
A circular rubber ring on a plain background.
Traceable materialsA material declaration is supplied with every order, and material data sheets are available on request. Food-contact moulds and their paperwork are supplied through our sister division TCI Culinary. A circular rubber ring on a plain background. Representative stock photograph. Photo: Tam DV
Machined metal components resting on an engineering drawing.
Masters archivedWe keep your masters and drawings on file so repeats are straightforward. Machined metal components resting on an engineering drawing. Representative stock photograph. Photo: EnCata PD
A packed carton ready for dispatch
. Photo: Brandable Box on Unsplash.Shipped with paperworkTools leave with the material declaration for your order, packed for the journey to your line.

Photos: Brandable Box, Jessica Streser, Wilhelm Gunkel, laura adai on Unsplash.

  • Fixed written quotesTooling price, cost per part and payment stages agreed up front. We'll confirm lead times on your quotation.
  • Please contact us before sending sensitive drawings or samples so that any confidentiality arrangements can be agreed.
  • Discuss the technical brief, review stages and project contacts with us when scoping your tooling.
  • Designed in WarwickshireA Warwickshire mould shop, part of TCI Group.
  • Staged approvalsFeasibility, development, validation and production, each on its own PO.
  • Any tooling-specific terms, expected service conditions and remedies must be confirmed in your written quotation and order agreement.

How we work with hospitality groups

What comes with every hospitality programme.

Discuss confidentiality

Please contact us before sending sensitive drawings or samples so that any confidentiality arrangements can be agreed.

Project communication

You have a named contact for your programme, from feasibility to repeat supply, and is the person your engineering, quality and procurement teams speak to.

Food-contact declarations

Platinum-cure food-contact silicones with the supplier's declaration of compliance supplied with every mould.

Project terms

Any tooling-specific terms, expected service conditions and remedies must be confirmed in your written quotation and order agreement.

Rows of shaped chocolates on a work surface.
Rows of shaped chocolates on a work surface. Representative stock photograph. Photo: Y S

Programme stages

From a chef's idea to moulds in every kitchen.

  1. Tasting-room brief

    We meet the pastry team, review references and agree the shape, finish and volumes.

  2. Design and master

    CAD or sculpted master, refined for release and detail, approved by the chef.

  3. Trial moulds

    Trial moulds for the kitchen to run before production sets are made.

  4. Production sets

    Multi-cavity production moulds sized to your equipment, for each site.

  5. Replacements and new sites

    Replacement and new-site sets made from the archived master.

Questions from chefs and hospitality buyers

What pastry teams and purchasing managers usually ask.

Are your culinary moulds food safe?

Yes. Food-contact moulds are made through our sister division TCI Culinary, which supplies its own declaration of compliance for the finished mould, the silicone supplier's EC 1935/2004 or FDA declaration, and supplier migration test reports. Our sister company TCI Culinary specialises in food-contact moulds and production for chefs and confectioners.

Can you turn a chef's sketch or sculpture into a mould?

Yes. We work from sketches, plated references, 3D scans or a master the pastry team has sculpted, and refine the geometry so it releases cleanly and holds detail in chocolate, mousse, ice and sugar.

Can you put our logo or crest into chocolate?

Yes. Branded chocolate, petits fours and turndown amenities are among the most common hotel requests. We check fine lettering for legibility in chocolate before the tool is made.

Do you make moulds for banqueting volumes?

Yes. Multi-cavity trays sized to your blast chiller, rack and gastronorm sizes let a small brigade produce banqueting volumes consistently.

What does a typical hospitality programme cost?

Pricing depends on your design, materials, quantities and tooling scope. Ask us for a quotation against your project brief.

Related industries

Other industries we tool for.

Rows of tealights with visible wicks.
Mass manufacturing

Candle, soap and home fragrance manufacturing

Multi-cavity production tooling for candle, soap, wax melt and home fragrance manufacturers, sized to your line and supplied as matched sets with spares.

Read more
A circuit board on an automated electronics production line
Industrial

Industrial, electronics and wearables

Potting and encapsulation moulds, gaskets and seals, compression-moulded keypads and wearable straps, from validation batches to production supply.

Read more
A row of cast face replicas mounted on a studio wall
Film and TV

Film, TV and special effects

Silicone and rubber moulds for prop houses, creature and prosthetic workshops and art departments: hero props, stunt doubles, prosthetics and set dressing.

Read more

All industries

Start a programme

Bring us the dessert or the brand mark.

Our sister division TCI Culinary will design the mould with your pastry team and quote the programme across your sites.

Your project, our expertise

Talk through your next mould.

Contact TCI Mouldings with your drawings, samples and production requirements so the technical brief and next steps can be discussed.

  • A real Warwickshire workshopUnit 15, Waterloo Park, Bidford-on-Avon, Alcester B50 4JG.
  • Real people on the phoneCall the team on 01789 224228, Monday to Friday.
  • Agree your project contactsDesign, production and aftercare come from the people you see here.
  • Part of TCI GroupFour specialist divisions under TCI Group, one engineering team. Visit TCI Group.
Two engineers reviewing a three-dimensional model on a computer.
Two engineers reviewing a three-dimensional model on a computer. Representative stock photograph. Photo: Kumpan Electric
Hands measuring a circular component with a digital calliper.
Hands measuring a circular component with a digital calliper. Representative stock photograph. Photo: AFINIS Group ® - AFINIS GASKET® Production
Hands measuring a flexible black sealing ring with digital callipers beside manufacturing equipment.
Representative stock photograph: flexible sealing-component inspection, not TCI premises or a TCI project. Stock photo credit
  • Thomas LaneManaging Director
  • George PrestonDesign & Project Manager
  • Kelly BallingerHead of Partnerships
  • Jim AndertonProduction Manager
  • TheodoreEmployee Welfare
Meet the team