Wax injection moulds
Vulcanised and silicone moulds for rings, pendants, settings and findings, ready for wax injection and casting.
Industries · Jewellery, watches and luxury goods
Vulcanised rubber and silicone moulds for wax injection, so a collection can be cast in precious metal at volume, plus moulded straps, hardware, presentation inserts and branded details. For jewellery houses, watch brands, casting houses and luxury goods manufacturers.
What luxury brands need

In fine jewellery the mould decides whether a piece needs ten minutes at the bench or an hour. In luxury goods, the moulded details are the brand.
We make wax injection moulds from masters in metal, resin or wax, cut so the wax releases with settings, galleries and engraving intact, and so the casting house gets the same pattern every shot. For watch brands and leather goods, we tool silicone and rubber straps, keepers, bumpers and moulded logos.
Please contact us before sending sensitive drawings or samples so that any confidentiality arrangements can be agreed.
Typical luxury work
Six families of tooling cover most enquiries in this industry.
Vulcanised and silicone moulds for rings, pendants, settings and findings, ready for wax injection and casting.
High-resolution printed and finished masters, so new designs go from CAD to production mould quickly.
Moulds for silicone and FKM watch straps, keepers, bumpers and gaskets with moulded logos and textures.
Tooling for moulded badges, zip pulls, emblems and trims that carry the brand.
Moulded silicone inserts, cradles and display pieces for boxes and windows.
Moulds for resin and metal-effect caps and decorative pieces for prestige fragrance.
Parts and tooling
A general guide. Geometry, material and volume decide the final tool.
Typical guide values, confirmed on your quotation. We confirm grade, tool life and lead time against your part and process.
| Piece | Typical mould | Typical run | Why it matters |
|---|---|---|---|
| Ring, pendant, setting | Vulcanised rubber or silicone | Hundreds to thousands of waxes | Settings and engraving survive release |
| Fine filigree | Low-shrink silicone | Hundreds of waxes | Thin sections without tearing |
| Watch strap | Compression or LSR tooling | Thousands of straps | Consistent fit, texture and logo |
| Badges and trims | Silicone or metal-backed tooling | Hundreds to thousands | Brand detail held crisp |
| Display inserts | Cast silicone tooling | Hundreds | Soft, precise cradles for product |
Send the drawing, the material and the quantities with your enquiry so we can confirm the route before quoting.
Examples
Eight typical jobs for silicone, polyurethane and rubber tooling in this industry. Each one can be a single development tool or a full production set.
Vulcanised rubber moulds for wax patterns in precious metal casting.
Vulcanised rubber, siliconeMoulded rubber and silicone straps with embossed branding.
Silicone, FKM routeRubber logos and badges for leather goods and apparel.
Silicone, PUSoft, precise inserts for watch and jewellery boxes.
Silicone, PUMoulds for clasps, buckles and fittings before metal production.
SiliconeCast caps and decorative closures for luxury packaging.
Silicone tool, resinMoulded props and plinths for windows and retail displays.
Silicone, resinShort runs of new designs for buyer and press samples.
SiliconeTooling ideas, clearly explained
Larger customers ask the same questions: how is it checked, what is it made from, and can you make another one exactly the same? This is how we answer them.




Photos: Brandable Box, Jessica Streser, Wilhelm Gunkel, laura adai on Unsplash.
How we work
Please contact us before sending sensitive drawings or samples so that any confidentiality arrangements can be agreed.
You have a named contact for your programme, from feasibility to repeat supply, and is the person your engineering, quality and procurement teams speak to.
Material documentation, inspection requirements, manufacturing responsibilities and any necessary approvals should be specified and confirmed for your project before work is authorised.
Any tooling-specific terms, expected service conditions and remedies must be confirmed in your written quotation and order agreement.

Programme stages
We review the part, the material, the quantities and the deadline, and propose the tooling.
Please contact us before sending sensitive drawings or samples so that any confidentiality arrangements can be agreed.
Master made from your CAD, scan or original, and the first tool trialled.
Fit, finish and release tuned from the trial before tools are duplicated.
Matched sets, planned replacements and archived masters.
Common questions
Yes. Send metal, resin or wax masters and we will mould, cut and test them, with sprues placed to suit your casting house.
Yes, as standard, before any design or master is sent. Collections are kept with a named team and never photographed for our own use without permission.
No. We make the moulds and masters, and work alongside your casting house.
Pricing depends on your design, materials, quantities and tooling scope. Ask us for a quotation against your project brief.
Related industries

Moulds for bespoke concrete, Jesmonite, terrazzo and composite basins, baths, worktops, wall panels, furniture and lighting for high-end interiors.
Read more
Moulds for replicating carved stone, ornamental plaster, terracotta, cast iron and timber details on listed buildings, cathedrals, estates and monuments.
Read more
Tooling for cast polyurethane and elastomer parts in offshore wind, oil and gas, subsea and grid infrastructure: bend restrictors, cable protection, buoyancy and seals.
Read moreStart a programme
We will propose the moulds, the expected wax life and a fixed programme price.
Your project, our expertise
Contact TCI Mouldings with your drawings, samples and production requirements so the technical brief and next steps can be discussed.



Thomas LaneManaging Director
George PrestonDesign & Project Manager
Kelly BallingerHead of Partnerships
Jim AndertonProduction Manager
TheodoreEmployee Welfare